Hydraulic Accumulator (Suspension)
Show/hide table
 | |
| Illustration 1 | g00641933 |
The suspension accumulator is charged with nitrogen gas.
Precharge pressure at the gas end ... 3600 ± 345 kPa (522 ± 50 psi)
Precharge pressure at the oil end ... 0
Service pressure of the accumulator at the gas end ... 20670 kPa (2998 psi)
Service pressure of the accumulator at the oil end ... 20670 kPa (2998 psi)
Operating temperature range ... -40 to 93 °C ( -40 to 199 °F)
(1) Torque on the end caps ... 298 N·m (220 lb ft)
Caterpillar Information System:
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks User Defined Shutdown Input
Implement Hydraulic Operations for Parallel Flow Systems{5000, 5051, 5057, 5084} Implement Hydraulic Operations for Parallel Flow Systems{5000, 5051, 5057, 5084}
3056 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
572R Pipelayer Engine Supplement Water Pump - Remove
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Tilt Cylinder - Install
572R Pipelayer Engine Supplement Water Pump - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Tilt Cylinder - Remove
3056 Engine for Caterpillar Built Machines Fuel System
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Holding Arm Cylinder - Install
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Suspension Cylinder (Front)
784C, 785C, 785D, 789C, 789D, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS™ and Truck Payload Measurement System (TPMS) Glossary of Terms
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Cylinder
3114, 3116, and 3126 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
980G Wheel Loader Power Train NoSPIN Differential
12H, 140H and 160H Motor Graders Power Train Transmission Oil Cooler - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Feed Roller Arm Cylinder - Remove
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Feed Roller Arm Cylinder - Install
572R Pipelayer Engine Supplement Hood and Dust Ejector - Remove and Install
12H, 140H and 160H Motor Graders Power Train Differential Lock Valve - Remove and Install
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Wastegate Solenoid
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Measuring Arm - Remove
TH62, TH63, TH82 and TH83 Telehandlers Radiator Screen - Clean
572R Pipelayer Engine Supplement Fan and Fan Drive - Remove and Install
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Engine Sensor Open/Short Test