D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Caterpillar


Suspension Cylinder (Front)

Usage:

D250E II 4PS



Illustration 1g00636394

Cylinder stroke ... 156 mm (6.2 inch)

(1) Torque on the bolt ... 60 ± 12 N·m (44 ± 9 lb ft)

(2) 142-6221 Spring

Test force ... 60 N (13.5 lb)
Test length ... 100 mm (3.9 inch)
Free length after test ... 110 mm (4.3 inch)
Outside diameter ... 87.52 mm (3.446 inch)

(3) Diameter of the piston at the two lands on each side of the seal ... 149.55 ± 0.05 mm (5.888 ± 0.002 inch)

(4) Diameter of the rod ... 114.250 ± 0.038 mm (4.4980 ± 0.0015 inch)

(5) Bore in the cylinder ... 150.05 ± 0.10 mm (5.908 ± 0.004 inch)

(6) Bore in the head ... 115.53 ± 0.13 mm (4.548 ± 0.005 inch)

(7) Torque on the bolts ... 105 ± 20 N·m (77 ± 15 lb ft)

(8) Lubricate the sealing lip on each seal with clean hydraulic oil.

(9) Torque on the retainer ... 8000 ± 600 N·m (5900 ± 443 lb ft)

Lubricate the threads of the retainer with clean grease.

Caterpillar Information System:

784C, 785C, 785D, 789C, 789D, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS™ and Truck Payload Measurement System (TPMS) Glossary of Terms
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Cylinder
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Holding Arm Cylinder - Remove
12H, 140H and 160H Motor Graders Power Train Transmission Oil Cooler - Remove
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Cylinder
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Holding Arm - Install
776D and 777D Off-Highway Truck/Tractors Power Train Transmission Hydraulic System
3114, 3116, and 3126 Engines for Caterpillar Built Machines Cylinder Head - Remove
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Holding Arm - Remove
980G Wheel Loader Power Train Differential
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Throttle Position Sensor
539 Knuckleboom Loader Hydraulic System Swing Motor Case Drain Oil - Measure
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Holding Arm Cylinder - Install
3056 Engine for Caterpillar Built Machines Fuel System
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Tilt Cylinder - Remove
572R Pipelayer Engine Supplement Water Pump - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Tilt Cylinder - Install
572R Pipelayer Engine Supplement Water Pump - Remove
3056 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
Implement Hydraulic Operations for Parallel Flow Systems{5000, 5051, 5057, 5084} Implement Hydraulic Operations for Parallel Flow Systems{5000, 5051, 5057, 5084}
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks User Defined Shutdown Input
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hydraulic Accumulator (Suspension)
3114, 3116, and 3126 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
980G Wheel Loader Power Train NoSPIN Differential
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.