Hoist Cylinder
Show/hide table
 | |
| Illustration 1 | g00639248 |
Cylinder stroke ... 2332 mm (92 inch)
(1) Torque on the nut ... 1100 ± 110 N·m (811 ± 81 lb ft)
Lubricate the threads of the nut with clean grease.
(2) Diameter of the piston at the two lands on each side of the seal ... 126.5 ± 0.03 mm (4.980 ± 0.001 inch)
(3) Diameter of the rod ... 76.15 ± 0.04 mm (2.998 ± 0.002 inch)
(4) Bore of the cylinder ... 127.0 ± 0.08 mm (5.000 ± 0.003 inch)
(5) Bore in the head ... 76.53 ± 0.03 mm (3.013 ± 0.001 inch)
Lubricate the threads on the head with clean grease.
Torque on the head ... 600 ± 130 N·m (443 ± 96 lb ft)
(6) Lubricate the sealing lip of each seal with clean hydraulic oil.
Caterpillar Information System:
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Holding Arm Cylinder - Remove
12H, 140H and 160H Motor Graders Power Train Transmission Oil Cooler - Remove
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist Cylinder
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Holding Arm - Install
776D and 777D Off-Highway Truck/Tractors Power Train Transmission Hydraulic System
3114, 3116, and 3126 Engines for Caterpillar Built Machines Cylinder Head - Remove
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Holding Arm - Remove
980G Wheel Loader Power Train Differential
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Throttle Position Sensor
539 Knuckleboom Loader Hydraulic System Swing Motor Case Drain Oil - Measure
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Preparation for Disassembly
CB-214D, CB-224D and CB-225D Vibratory Compactors Lifting and Tying Down the Machine
784C, 785C, 785D, 789C, 789D, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS™ and Truck Payload Measurement System (TPMS) Glossary of Terms
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Suspension Cylinder (Front)
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Holding Arm Cylinder - Install
3056 Engine for Caterpillar Built Machines Fuel System
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Tilt Cylinder - Remove
572R Pipelayer Engine Supplement Water Pump - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Tilt Cylinder - Install
572R Pipelayer Engine Supplement Water Pump - Remove
3056 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
Implement Hydraulic Operations for Parallel Flow Systems{5000, 5051, 5057, 5084} Implement Hydraulic Operations for Parallel Flow Systems{5000, 5051, 5057, 5084}
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks User Defined Shutdown Input
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hydraulic Accumulator (Suspension)