MID 036 - CID 0276 - FMI 13 Left Turbo Inlet Pressure calibration required
产生此代码的情况:
电子控制模块(ECM)检测到以下一种情况。 涡轮增压器压气机进口压力为大气压 ± 8 千帕 (1.2 磅/平方英寸)。 涡轮增压器压气机进口压力小于 45 千帕 (6.5 磅/平方英寸)。 涡轮增压器压气机进口压力大于 111 千帕 (16 磅/平方英寸)。 在进行校准的过程中,涡轮增压器压气机进口压力的变化幅度大于 5 千帕 (0.5 磅/平方英寸)。 诊断代码 276-03 和 276-04 处于当前状态。
系统响应:
此诊断代码未记录在存储器中。 ECM 会使用先前校准的数据。
测试步骤 1. 进行以下的诊断步骤: 模拟传感器 - 校准
结果:
- 正常 - 停止
- 已修复,正常。 - 停止
Caterpillar Information System:
3054E and 3056E Industrial Engines Engine Starting
C-9 Engines for Caterpillar Built Machines Inlet Manifold Pressure - Test
C9 Engines for Caterpillar Built Machines Crankshaft - Remove
3176C and 3196 Industrial Engines Air Compressor Drive Gear - Install
3612 and 3616 Engines Vibration Damper - Install
3176C and 3196 Industrial Engines Air Compressor Drive Gear - Remove
3612 and 3616 Engines Vibration Damper - Remove
C9 Engine For Caterpillar Built Machines Belt Tensioner - Remove and Install
C9 Engine For Caterpillar Built Machines Engine Oil Cooler - Install
C9 Engine For Caterpillar Built Machines Engine Oil Cooler - Remove
3056 Engine for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
C9 Engine For Caterpillar Built Machines Fuel Filter Base - Remove and Install
C9 Engines for Caterpillar Built Machines Crankshaft - Install
3003, 3013, 3014 and 3024 Industrial Engines Starting the Engine
3054 and 3056 Industrial and Generator Set Engines Turbocharger
C-9 Engines for Caterpillar Built Machines Aftercooler - Test
SR4 and SR4B Electric Power Generation Rewind Data General Information
C9 Engine For Caterpillar Built Machines Cylinder Head - Remove
3512B Marine Auxiliary Engines Barring Group - Remove and Install
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System Electrical Connector - Inspect
C9 Engine For Caterpillar Built Machines Cylinder Head - Install
3512B Marine Auxiliary Engines Prelubrication Oil Pump - Remove and Install
3512B Marine Auxiliary Engines Jacket Water Heater - Remove and Install
C9 Engine For Caterpillar Built Machines Lifter Group - Remove and Install