Unit Injector Sleeve - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1P-3042 | 中丝锥 | 1 |
| B | 221-0052 | 导向套 | 1 |
| C | 9U-6858 | 桥接板 | 1 |
| 221-9778 | 拉拔器螺柱 | 1 | |
| 4K-0367 | 全高螺母 | 1 | |
| 8C-6913 | 硬垫圈 | 1 | |
| 9U-6877 | 止推轴承 | 1 | |
| D | 221-9803 | 橡胶止动块 | 1 |
开始:
- 拆下单体喷油器。 请参阅拆解和组装, "单体喷油器 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在进行检验、保养、测试、调整及维修产品期间，必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前，要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品，请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 从冷却系统将冷却液排入合适的容器以便保存或废弃这些冷却液。 请参阅操作和保养手册, "加注容量和建议"。
- 在单体喷油器套管底部定位工具 (D) 。
- 用清洁的润滑脂涂抹工具 (A) 。 使用工具 (A) 和工具 (B) ，在单体喷油器套管中攻出螺纹。
- 在单体喷油器套管 (1) 中安装工具 (C) 。
Show/hide table
 | |
| 图 1 | g01137445 |
- 拆下单体喷油器套管 (1) 。 拆下 O 形密封圈。
Caterpillar Information System:
3126 Truck Engine Military Engine Lifting Bracket - Remove and Install
SR4 and SR4B Generators and Control Panels Electromechanical Control Panel with Automatic Start/Stop
3126B and 3126E On-highway Engines Factory Passwords Worksheet
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines External Potential Transformer Connections
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Electrical Connector - Inspect
3512B Marine Auxiliary Engine Programmable System Parameters
3126 Truck Engine Military Injection Actuation Pressure Control Valve - Assemble
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Inaccurate Display of Voltage or Current or Power - Troubleshoot
3126 Truck Engine Military Injection Actuation Pressure Control Valve - Disassemble
3126 Truck Engine Military Injection Actuation Pressure Control Valve - Install
3612 and 3616 Engines Prelube Pump Motors
G3304 and G3306 Engines Governor Control
C-9 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
G3304 and G3306 Engines Governor Linkage - Woodward PSG Governor For Turbocharged Engines
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines AC Voltage Range - Adjust
G3304 and G3306 Engines Governor Linkage
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Alarm Module Control - Adjust
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Speed Sensor (Engine) - Adjust
3500 Engines for Caterpillar Built Generator Sets Fuel Pressure Regulator
C9 Engines for Caterpillar Built Machines Unit Injector Sleeve - Install
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Starting Motor Magnetic Switch - Test
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Pulse Width Modulated (PWM) Sensor - Test
3612 and 3616 Engines Engine Oil Filter Housings - Remove
3406E On-Highway Engine Exhaust Manifold - Remove and Install