3126 Truck Engine Military Caterpillar

Engine Lifting Bracket - Remove and Install

Usage:

3126 1BW

Removal Procedure

Start By:

Remove the fan drive in order to remove the front engine lifting bracket. Refer to Disassembly and Assembly, "Fan Drive - Remove".

Show/hide table




Illustration 1	g01011843

Remove bolts (1) and the washers from rear engine lifting bracket (2) .

Remove rear engine lifting bracket (2) from the engine.

Installation Procedure

Show/hide table




Illustration 2	g01011843

Position rear engine lifting bracket (2) on the engine.

Install the washers and bolts (1) that hold rear engine lifting bracket (2) .

End By: Install the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Install".

Caterpillar Information System:

SR4 and SR4B Generators and Control Panels Electromechanical Control Panel with Automatic Start/Stop

3126B and 3126E On-highway Engines Factory Passwords Worksheet

Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines External Potential Transformer Connections

Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Electrical Connector - Inspect

3512B Marine Auxiliary Engine Programmable System Parameters

3126 Truck Engine Military Injection Actuation Pressure Control Valve - Assemble

Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Inaccurate Display of Voltage or Current or Power - Troubleshoot

3126 Truck Engine Military Injection Actuation Pressure Control Valve - Disassemble

3126 Truck Engine Military Injection Actuation Pressure Control Valve - Install

3612 and 3616 Engines Prelube Pump Motors

G3304 and G3306 Engines Governor Control

SR4 and SR4B Generators and Control Panels Stator Winding Temperature - Measure/Record

C9 Engines for Caterpillar Built Machines Unit Injector Sleeve - Remove

C-9 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston

G3304 and G3306 Engines Governor Linkage - Woodward PSG Governor For Turbocharged Engines

Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines AC Voltage Range - Adjust

G3304 and G3306 Engines Governor Linkage

Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Alarm Module Control - Adjust

Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Speed Sensor (Engine) - Adjust

3500 Engines for Caterpillar Built Generator Sets Fuel Pressure Regulator

C9 Engines for Caterpillar Built Machines Unit Injector Sleeve - Install

Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Starting Motor Magnetic Switch - Test

Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Pulse Width Modulated (PWM) Sensor - Test

3612 and 3616 Engines Engine Oil Filter Housings - Remove