Injection Actuation Pressure Control Valve - Assemble
Assembly Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Clean the injection actuation pressure control valve and the components for the injection actuation pressure control valve.
- Install new O-ring seals (1) and (4), and backup ring (3) on the injection actuation pressure control valve. Lubricate the O-ring seals with clean engine oil.
Show/hide table
Illustration 1 | g01011197 |
(1) O-ring seal (2) Nut (3) Backup ring (4) O-ring seal (5) Solenoid valve (6) Spacer |
Caterpillar Information System:
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Inaccurate Display of Voltage or Current or Power - Troubleshoot
3126 Truck Engine Military Injection Actuation Pressure Control Valve - Disassemble
3126 Truck Engine Military Injection Actuation Pressure Control Valve - Install
3612 and 3616 Engines Prelube Pump Motors
G3304 and G3306 Engines Governor Control
SR4 and SR4B Generators and Control Panels Stator Winding Temperature - Measure/Record
SR4 and SR4B Generators and Control Panels Space Heater - Check
3126 Truck Engine Military Injection Actuation Pressure Control Valve - Remove
G3304 and G3306 Engines Belt Tightener
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Zero Display of Voltage or Current - Troubleshoot
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Erratic GSC Operation - Troubleshoot
3618 Engine Crankshaft Front Seal and Wear Sleeve - Remove
3512B Marine Auxiliary Engine Programmable System Parameters
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Electrical Connector - Inspect
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines External Potential Transformer Connections
3126B and 3126E On-highway Engines Factory Passwords Worksheet
SR4 and SR4B Generators and Control Panels Electromechanical Control Panel with Automatic Start/Stop
3126 Truck Engine Military Engine Lifting Bracket - Remove and Install
C9 Engines for Caterpillar Built Machines Unit Injector Sleeve - Remove
C-9 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
G3304 and G3306 Engines Governor Linkage - Woodward PSG Governor For Turbocharged Engines
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines AC Voltage Range - Adjust
G3304 and G3306 Engines Governor Linkage
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Alarm Module Control - Adjust