Injection Actuation Pressure Control Valve - Disassemble
Disassembly Procedure
Start By:
- Remove the injection actuation pressure control valve. Refer to Disassembly and Assembly, "Injection Actuation Pressure Control Valve - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove O-ring seals (1) and (4), and backup ring (3) from the injection actuation pressure control valve. Inspect the components of the injection actuation pressure control valve for wear or damage. If any part is worn or damaged, use a new part for replacement.
Show/hide table
Illustration 1 | g01011197 |
(1) O-ring seal (2) Nut (3) Backup ring (4) O-ring seal (5) Solenoid valve (6) Spacer |
Caterpillar Information System:
3126 Truck Engine Military Injection Actuation Pressure Control Valve - Install
3612 and 3616 Engines Prelube Pump Motors
G3304 and G3306 Engines Governor Control
SR4 and SR4B Generators and Control Panels Stator Winding Temperature - Measure/Record
SR4 and SR4B Generators and Control Panels Space Heater - Check
3126 Truck Engine Military Injection Actuation Pressure Control Valve - Remove
G3304 and G3306 Engines Belt Tightener
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Zero Display of Voltage or Current - Troubleshoot
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Erratic GSC Operation - Troubleshoot
3618 Engine Crankshaft Front Seal and Wear Sleeve - Remove
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Charging System - Test
Caterpillar Monitoring System for Electronic Modular Control Panel Tattletale Mode
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Inaccurate Display of Voltage or Current or Power - Troubleshoot
3126 Truck Engine Military Injection Actuation Pressure Control Valve - Assemble
3512B Marine Auxiliary Engine Programmable System Parameters
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Electrical Connector - Inspect
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines External Potential Transformer Connections
3126B and 3126E On-highway Engines Factory Passwords Worksheet
SR4 and SR4B Generators and Control Panels Electromechanical Control Panel with Automatic Start/Stop
3126 Truck Engine Military Engine Lifting Bracket - Remove and Install
C9 Engines for Caterpillar Built Machines Unit Injector Sleeve - Remove
C-9 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
G3304 and G3306 Engines Governor Linkage - Woodward PSG Governor For Turbocharged Engines
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines AC Voltage Range - Adjust