Injection Actuation Pressure Control Valve - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 5P-0333     | Crowfoot Flare Nut Wrench     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) in order to install the injection actuation pressure control valve on the unit injector hydraulic pump. Tighten the injection actuation pressure control valve to a torque of 50 ± 5 N·m (37 ± 4 lb ft).
Show/hide table
Illustration 1 | g00644655 |
- Install the solenoid valve, the spacer, and nut (3) on the injection actuation pressure control valve (1). Tighten nut (3) to a torque of 5.5 ± 1.5 N·m (49 ± 13 lb in).
Show/hide table
Illustration 2 | g00644654 |
- Reconnect harness assembly (2) to the injection actuation pressure control valve.
Caterpillar Information System:
3612 and 3616 Engines Prelube Pump Motors
G3304 and G3306 Engines Governor Control
SR4 and SR4B Generators and Control Panels Stator Winding Temperature - Measure/Record
SR4 and SR4B Generators and Control Panels Space Heater - Check
3126 Truck Engine Military Injection Actuation Pressure Control Valve - Remove
G3304 and G3306 Engines Belt Tightener
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Zero Display of Voltage or Current - Troubleshoot
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Erratic GSC Operation - Troubleshoot
3618 Engine Crankshaft Front Seal and Wear Sleeve - Remove
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Charging System - Test
Caterpillar Monitoring System for Electronic Modular Control Panel Tattletale Mode
3406E and 3456 Generator Set Engines Turbocharger Outlet Pressure Sensor - Remove and Install
3126 Truck Engine Military Injection Actuation Pressure Control Valve - Disassemble
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Inaccurate Display of Voltage or Current or Power - Troubleshoot
3126 Truck Engine Military Injection Actuation Pressure Control Valve - Assemble
3512B Marine Auxiliary Engine Programmable System Parameters
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Electrical Connector - Inspect
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines External Potential Transformer Connections
3126B and 3126E On-highway Engines Factory Passwords Worksheet
SR4 and SR4B Generators and Control Panels Electromechanical Control Panel with Automatic Start/Stop
3126 Truck Engine Military Engine Lifting Bracket - Remove and Install
C9 Engines for Caterpillar Built Machines Unit Injector Sleeve - Remove
C-9 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
G3304 and G3306 Engines Governor Linkage - Woodward PSG Governor For Turbocharged Engines