3612 and 3616 Engines Caterpillar


Prelube Pump Motors

Usage:

3616 1PD

电动预润滑泵马达

表 1
电动预润滑泵马达(连续运转)    
电动机     额定电压     电流     额定功率     车速    
7E-6244     50 Hz 时,电压为 110 - 220 VAC     20 - 10 安    
1.1 kW (1.50 hp)    
1500 RPM    
7E-6245     60 Hz 时,电压为 115 - 230 VAC     20 - 10 安    
1.1 kW (1.50 hp)    
1800转/分    
7E-6246     60 Hz 时,电压为 230 - 460 VAC (1)     20 - 10 安    
1.1 kW (1.50 hp)    
1800转/分    
( 1 ) 3 相位

表 2
电动预润滑泵马达(间歇性运转)    
电动机     额定电压     电流     额定功率     车速    
2W-3355     60 Hz 时,电压为 115 - 230 VAC     20 - 10 安    
1.1 kW (1.50 hp)    
1200 RPM    
2W-3356     50 Hz 时,电压为 115 - 230 VAC     20 - 10 安    
1.1 kW (1.50 hp)    
1000 RP    
9Y-6016     64 VDC     20 - 10 安    
1.5 kW (2.00 hp)    
1800转/分    

表 3
电动预润滑泵马达起动器    
起动马达     电压     控制线圈电压    
7C-5690     230 VAC     24 VDC    
7C-5691     115 VAC     120 VAC    
7C-5692     230 VAC     120 VAC    
7C-5693     230 VAC     240 VAC    
7C-6203     115 VAC     24 VDC    
7E-5027     460 VAC     24 VDC    
7E-6267     230 VAC     120 VDC    
7E-8325     115 VAC     24 VDC    
7E-8326     115 VAC     115 VAC    
7E-8327     230 VAC     24 VDC    
7E-8328     230 VAC     115 VAC    
7E-8329     230 VAC     24 VDC    
9Y-0929     460 VAC     120 VAC    

气动预润滑泵马达

表 4
气动预润滑泵马达    
电动机     压力     车速     额定功率    
1W-0899    
690 kPa (100 psi)    
1200 rpm    
1.5 kW (2.00 hp)    

Caterpillar Information System:

G3304 and G3306 Engines Governor Control
SR4 and SR4B Generators and Control Panels Stator Winding Temperature - Measure/Record
SR4 and SR4B Generators and Control Panels Space Heater - Check
3126 Truck Engine Military Injection Actuation Pressure Control Valve - Remove
G3304 and G3306 Engines Belt Tightener
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Zero Display of Voltage or Current - Troubleshoot
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Erratic GSC Operation - Troubleshoot
3618 Engine Crankshaft Front Seal and Wear Sleeve - Remove
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Charging System - Test
Caterpillar Monitoring System for Electronic Modular Control Panel Tattletale Mode
3406E and 3456 Generator Set Engines Turbocharger Outlet Pressure Sensor - Remove and Install
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines No Engine Shutdown - Troubleshoot
3126 Truck Engine Military Injection Actuation Pressure Control Valve - Install
3126 Truck Engine Military Injection Actuation Pressure Control Valve - Disassemble
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Inaccurate Display of Voltage or Current or Power - Troubleshoot
3126 Truck Engine Military Injection Actuation Pressure Control Valve - Assemble
3512B Marine Auxiliary Engine Programmable System Parameters
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines Electrical Connector - Inspect
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines External Potential Transformer Connections
3126B and 3126E On-highway Engines Factory Passwords Worksheet
SR4 and SR4B Generators and Control Panels Electromechanical Control Panel with Automatic Start/Stop
3126 Truck Engine Military Engine Lifting Bracket - Remove and Install
C9 Engines for Caterpillar Built Machines Unit Injector Sleeve - Remove
C-9 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.