Vibration Damper and Pulley - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | - | 导向螺栓 5/8 - 18 NF x 7 in |
2 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下两个螺栓 (1) 。 安装工具 (A) 。
Show/hide table
 | |
| 图 1 | g01077686 |
- 拆下剩余的螺栓 (1) 。 拆下板 (3) 。 将减振器 (4) 从适配器 (5) 和皮带轮 (2) 上拆下。
- 将皮带轮 (2) 和适配器 (5) 从曲轴上拆下。
- 将工具 (A) 从曲轴上拆下。
安装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | - | 导向螺栓 5/8 - 18 NF x 7 in |
2 |
| B | 4C-5593 | 防粘结剂 | - |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
彻底接触粘滞减振器是否有漏油或外壳凹陷(损坏)的迹象。 这两个情况中的任何一个都可能导致重块与外壳相接触。 这样会影响粘滞减振器的操作。 |
- 将工具 (A) 安装在曲轴中。
Show/hide table
| | |
| 图 2 | g01077686 |
- 将适配器 (5) 和皮带轮 (2) 安装到工具 (A) 上。
- 将减振器 (4) 安装到工具 (A) 上。
- 将板 (3) 安装到工具 (A) 上。
- 将工具 (B) 涂抹在螺栓 (1) 上。 安装螺栓 (1) 。 拆下工具 (A) ，并安装剩余螺栓 (1) 。
Caterpillar Information System:
3003, 3013, 3014 and 3024 Industrial Engines Refill Capacities
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Emergency Stopping
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program
30SI Series and 34SI Series Alternator Normal Operation
3114, 3116, and 3126 Industrial and Generator Set Engines Safety Signs and Labels
3003, 3013, 3014 and 3024 Industrial Engines Reference Material
30SI Series and 34SI Series Alternator General Information
3406E On-Highway Engine Engine Control Module - Remove and Install
3003, 3013, 3014 and 3024 Industrial Engines Engine Crankcase Breather - Clean
3116 On Highway Engines Crankshaft Main Bearings - Remove
3512B Marine Auxiliary Engines Fumes Filter - Remove and Install
3512B Marine Auxiliary Engines Air Screen Housing - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines Crankshaft - Remove
C-15, C-16 and C-18 Truck Engines Water Pump - Remove
SR4 and SR4B Generators and Control Panels Generator Description
SR4 and SR4B Generators and Control Panels Model View Illustrations
Caterpillar Monitoring System for Electronic Modular Control Panel Main Display Module
3114, 3116, and 3126 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3500B and 3500B High Displacement Generator Set Engines Factory Passwords Worksheet
3612 and 3616 Engines Governor - Remove
3508, 3512, and 3516 Generator Sets Generator Lead Connections
3618 Engine Engine Lifting Bracket - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines Crankshaft - Install
3508, 3512, and 3516 Generator Sets Voltage Connections