30SI Series and 34SI Series Alternator Caterpillar

Alternator

Usage:

769C 01X

Show/hide table




Illustration 1	g00624846
Front View of the 30-SI Alternator

Show/hide table




Illustration 2	g00624845
Side View of the 30-SI Alternator

Show/hide table




Illustration 3	g00624843
Rear View of the 30-SI Alternator

Show/hide table




Illustration 4	g00659616
Front View of the 34-SI Alternator

Show/hide table




Illustration 5	g00659997
Side View of the 34-SI Alternator

Show/hide table




Illustration 6	g00660002
Rear View of the 34-SI Alternator

Show/hide table

Table 1
Specifications for 30-SI Alternators
Part Number Remanufactured Part Number	4N-3987 OR-5204	4N-3986 OR-5203	114-2401 OR-8997	9X-7803 OR-3749	8C-6163 OR-1699
Voltage Rating	32V	24V	24V	24V	12V
Current	60A	60A	75A	100A	105A
Application	Heavy Duty	Heavy Duty	Heavy Duty	Heavy Duty	Heavy Duty
Approved for Marine Use	Yes	Yes	No	No	Yes
Weight	11.9 kg (26.2 lb)	11.9 kg (26.2 lb)	11.9 kg (26.2 lb)	11.9 kg (26.2 lb)	11.9 kg (26.2 lb)
Polarity	Negative Ground Insulated Case	Negative Ground Insulated Case	Negative Case Ground	Negative Case Ground	Negative Ground Insulated Case
Minimum Full Load Current (Cold) at 5000 rpm	60A	54A	67.5A	94A	96A
Minimum Full Load Current (Cold) at 1500 rpm	20A	19A	26A ⁽¹⁾ ⁽²⁾	9A ⁽¹⁾ ⁽³⁾	42A
Turn-on Speed	2000 rpm	2600 rpm	3000 rpm	2600 rpm	2700 rpm
Output Voltage	36.6 ±1.5 V	28 ±1 V	27.5 ±1.0 V	28 ±1 V	14 ±0.5 V
Rotation ⁽⁴⁾	CW CCW	CW CCW	CW CCW	CW CCW	CW CCW

Show/hide table

^( 1 )	Minimum Full Load Current (Cold) at 2000 rpm
^( 2 )	The minimum speed of the alternator should be 1800 rpm at low engine idle.
^( 3 )	The minimum speed of the alternator should be 2300 rpm at low engine idle.
^( 4 )	The rotation is viewed from the pulley.

Show/hide table

Table 2
Specifications for 34-SI Alternators
Part Number	169-4319	167-7812	165-5140	167-7816
Voltage Rating	24V	24V	24V	12V
Current	75A	75A	100A	110A
Application	Heavy Duty Pad Mount	Heavy Duty	Heavy Duty	Heavy Duty
Approved for Marine Use	Yes	Yes	Yes	Yes
Weight	11.9 kg (26.2 lb)	11.9 kg (26.2 lb)	11.9 kg (26.2 lb)	11.9 kg (26.2 lb)
Polarity	Negative Ground Insulated Case	Negative Ground Insulated Case	Negative Ground Insulated Case	Negative Ground Insulated Case
Minimum Full Load Current (Cold) at 5000 rpm	67.5A	67.5A	94A	99A
Minimum Full Load Current (Cold) at 1500 rpm	26A ⁽¹⁾ ⁽²⁾	26A ⁽¹⁾ ⁽²⁾	9A ⁽¹⁾ ⁽²⁾	42A
Turn-on Speed	3000 rpm	3000 rpm	2600 rpm	2700 rpm
Output Voltage	28 ±1 V	28 ±1 V	28 ±1 V	14 ±1 V
Rotation ⁽³⁾	CW CCW	CW CCW	CW CCW	CW CCW

Show/hide table

^( 1 )	Minimum Full Load Current (Cold) at 2000 rpm
^( 2 )	The minimum speed of the alternator should be 1800 rpm at low engine idle.
^( 3 )	The rotation is viewed from the pulley.

Show/hide table

Table 3
Torque Specifications for the 30-SI Alternator
Part Number Remanufactured Part Number	4N-3987 OR-5204	4N-3986 OR-5203	114-2401 OR-8997	9X-7803 OR-3749	8C-6163 OR-1699
Pulley Nut	102 ± 7 N·m (75 ± 5 lb ft)	102 ± 7 N·m (75 ± 5 lb ft)	102 ± 7 N·m (75 ± 5 lb ft)	102 ± 7 N·m (75 ± 5 lb ft)	102 ± 7 N·m (75 ± 5 lb ft)
Cover for the Rectifier	5.3 N·m (47 lb in)	5.3 N·m (47 lb in)	5.3 N·m (47 lb in)	5.3 N·m (47 lb in)	5.3 N·m (47 lb in)
Cover Plate Regulator and Mounting Plate Heat Sink	3 N·m (27 lb in)	3 N·m (27 lb in)	3 N·m (27 lb in)	3 N·m (27 lb in)	3 N·m (27 lb in)
+ Battery Terminal	7.1 ± .8 N·m (62.8 ± 7.1 lb in)	7.1 ± .8 N·m (62.8 ± 7.1 lb in)	7.1 ± .8 N·m (62.8 ± 7.1 lb in)	7.1 ± .8 N·m (62.8 ± 7.1 lb in)	7.1 ± .8 N·m (62.8 ± 7.1 lb in)
- Battery Terminal	6.2 ± .6 N·m (54.9 ± 5.3 lb in)	6.2 ± .6 N·m (54.9 ± 5.3 lb in)	6.2 ± .6 N·m (54.9 ± 5.3 lb in)	6.2 ± .6 N·m (54.9 ± 5.3 lb in)	6.2 ± .6 N·m (54.9 ± 5.3 lb in)
"R" Terminal Nut for the Regulator Stud	2 N·m (18 lb in)	2 N·m (18 lb in)	2 N·m (18 lb in)	2 N·m (18 lb in)	2 N·m (18 lb in)
Nut for the Hex Mounting Bolt Bolt for the Adjusting Lug	88 N·m (65 lb ft)	88 N·m (65 lb ft)	88 N·m (65 lb ft)	88 N·m (65 lb ft)	88 N·m (65 lb ft)
Frame Bolts	6.2 N·m (55 lb in)	6.2 N·m (55 lb in)	6.2 N·m (55 lb in)	6.2 N·m (55 lb in)	6.2 N·m (55 lb in)
Ground Screw	6 N·m (55 lb in)	6 N·m (55 lb in)	6 N·m (55 lb in)	6 N·m (55 lb in)	6 N·m (55 lb in)

Show/hide table

Table 4
Torque Specifications for the 34-SI Alternator
Part Number	169-4319	167-7812	165-5140	167-7816
Pulley Nut	102 ± 7 N·m (75 ± 5 lb ft)	102 ± 7 N·m (75 ± 5 lb ft)	102 ± 7 N·m (75 ± 5 lb ft)	102 ± 7 N·m (75 ± 5 lb ft)
Cover for the Rectifier	5.3 N·m (47 lb in)	5.3 N·m (47 lb in)	5.3 N·m (47 lb in)	5.3 N·m (47 lb in)
Cover Plate Regulator and Mounting Plate Heat Sink	3 N·m (27 lb in)	3 N·m (27 lb in)	3 N·m (27 lb in)	3 N·m (27 lb in)
+ Battery Terminal	7.1 ± .8 N·m (62.8 ± 7.1 lb in)	7.1 ± .8 N·m (62.8 ± 7.1 lb in)	7.1 ± .8 N·m (62.8 ± 7.1 lb in)	7.1 ± .8 N·m (62.8 ± 7.1 lb in)
- Battery Terminal	6.2 ± .6 N·m (54.9 ± 5.3 lb in)	6.2 ± .6 N·m (54.9 ± 5.3 lb in)	6.2 ± .6 N·m (54.9 ± 5.3 lb in)	6.2 ± .6 N·m (54.9 ± 5.3 lb in)
"R" Terminal Nut for the Regulator Stud	2 N·m (18 lb in)	2 N·m (18 lb in)	2 N·m (18 lb in)	2 N·m (18 lb in)
Nut for the Hex Mounting Bolt Bolt for the Adjusting Lug	88 N·m (65 lb ft)	88 N·m (65 lb ft)	88 N·m (65 lb ft)	88 N·m (65 lb ft)
Frame Bolts	6.2 N·m (55 lb in)	6.2 N·m (55 lb in)	6.2 N·m (55 lb in)	6.2 N·m (55 lb in)
Ground Screw	6 N·m (55 lb in)	6 N·m (55 lb in)	6 N·m (55 lb in)	6 N·m (55 lb in)

The results for a 12 volt 30-SI and 34-SIAlternator's rotor field winding test at 27 °C (80 °F) are in the following list:

5.5 to 9.0 Amperes
1.4 to 2.1 Ohms

The results for a 24 volt 30-SI and 34-SIAlternator's rotor field winding test at 27 °C (80 °F) are in the following list:

2.9 to 3.6 Amperes
6.9 to 8.1 Ohms

The results for a 32 volt 30-SI Alternator's rotor field winding test at 27 °C (80 °F) are in the following list:

1.4 to 1.9 Amperes
17.0 to 21.4 Ohms

Show/hide table




Illustration 7	g00650373
30-SI Alternator Schematic (Negative Ground Model)

Show/hide table




Illustration 8	g00624983
34-SI Alternator Schematic (Negative Ground Model)

Show/hide table




Illustration 9	g00625062
34-SI Alternator Schematic (Insulated Model)

Caterpillar Information System:

3512B Marine Auxiliary Engines Water Temperature Regulators - Install

3512B Marine Auxiliary Engines Water Temperature Regulators - Remove

3126B Truck Engine Fuel System

3512B Marine Auxiliary Engines Exhaust Manifold - Remove and Install

3512B Marine Auxiliary Engines Exhaust Elbow - Remove and Install

C-9 Engines for Caterpillar Built Machines Piston and Rings

3612 and 3616 Engines Fuel Pressure Control Valve - Disassemble

C-15, C-16 and C-18 Truck Engines Housing (Front) - Remove

On-Highway Engines Electronic PTO Installation and Application Guide Component Installation

3512B Marine Auxiliary Engines Air Inlet Manifold - Remove and Install

3512B Marine Auxiliary Engines Aftercooler - Remove and Install

Generator Set Load Sharing Module Installation Requirements

Caterpillar Monitoring System for Electronic Modular Control Panel General Information

C-15, C-16 and C-18 Truck Engines Housing (Front) - Install

3116 On Highway Engines Turbocharger - Remove

3116 On Highway Engines Turbocharger - Install

3512B Marine Auxiliary Engine Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting

3003, 3013, 3014 and 3024 Industrial Engines Engine Description

3116 On Highway Engines Exhaust Manifold - Remove and Install

3512B Marine Auxiliary Engines Crankshaft Main Bearings - Install

3512B Marine Auxiliary Engines Camshaft - Remove

3512B Marine Auxiliary Engines Camshaft - Install

3512B Marine Auxiliary Engines Crankshaft - Remove

3512B Marine Auxiliary Engines Crankshaft - Install