3406E On-Highway Engine Caterpillar


Inlet Air Temperature Sensor - Remove and Install

Usage:

3406E 1MM

Removal Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g00621523
    Typical example

  1. Disconnect inlet air temperature sensor (1) from the engine wiring harness.

  2. Remove inlet air temperature sensor (1).

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 2g00621523
    Typical example

  1. Install inlet air temperature sensor (1). Tighten the sensor to a torque of 15 ± 3 N·m (11 ± 2 lb ft).

  2. Remove inlet air temperature sensor (1).
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.