Crankshaft Position Sensor - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect wiring harness (1) from the crankshaft position sensor.
- Remove the bolt and the clip from the crankshaft position sensor. Remove the crankshaft position sensor.
Show/hide table
| |
| Illustration 1 | g00518015 |
|
Typical example | |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install the crankshaft position sensor. Put the clip in position and install the bolt that holds the crankshaft position sensor.
- Connect wiring harness (1) to the crankshaft position sensor.
Show/hide table
|
| |
| Illustration 2 | g00518015 |
|
Typical example | |
Caterpillar Information System:
3406E On-Highway Engine Camshaft Position Sensor - Remove and Install
On-Highway Engines Electronic PTO Installation and Application Guide PTO Configurations - Test
3406E On-Highway Engine Front Cover - Install
3406E On-Highway Engine Front Cover - Remove
3406E On-Highway Engine Engine Oil Cooler - Assemble
G3304 and G3306 Engines Governor
G3304 and G3306 Engines Pressure Sensor
3512B Marine Auxiliary Engine MID 111 - CID 1355 - FMI 04 Left Turbo Air Outlet Temp Sensor short to gnd
3512B Marine Auxiliary Engine MID 111 - CID 1355 - FMI 03 Left Turbo Air Out Temp Sensor open/short to +batt
3512B Marine Auxiliary Engine MID 111 - CID 1354 - FMI 04 Right Turbo Air Outlet Temp Sensor short to gnd
3512B Marine Auxiliary Engine MID 111 - CID 1354 - FMI 03 Right Turbo Air Out Temp Sens open/short to +batt
3512B Marine Auxiliary Engine MID 111 - CID 1353 - FMI 04 Engine Air Mnfld Outlet Temp Sensor short to gnd
3512B Marine Auxiliary Engine Emergency Stop Switch
3512B Marine Auxiliary Engine Starting Motor System
3512B Marine Auxiliary Engine Engine Control Switch (ECS)
3406E Marine Engine Cylinder Block
3512B Marine Auxiliary Engine Engine Sensor Open/Short Test
C-15, C-16 and C-18 Truck Engines Accessory Drive - Install
Electronic Modular Control Panel II (EMCP II) For MUI Engines Erratic GSC Operation - Troubleshoot
3406E Marine Engine Engine Oil Pressure
C-15, C-16 and C-18 Truck Engines Accessory Drive - Disassemble
3512B Marine Auxiliary Engine Engine Speed/Timing Sensor
3512B Marine Auxiliary Engine Air Starting Motor
3054B Industrial Engine Safety Signs and Labels