Engine Crankcase Breather - Clean
Show/hide table
Illustration 1 | g00602469 |
The engine crankcase breather is located on top of the engine. The engine crankcase breather is on the left side of the engine.
- Open the engine compartment access door.
- Loosen the breather outlet hose clamp. Remove the hose from the breather cover.
- Remove the bolt that is on top of the breather. Remove the engine crankcase breather.
- Check the condition of the breather seal. Replace the seal if the seal is damaged.
- Wash the breather in a clean nonflammable solvent.
- Shake the breather until the breather is dry. You may also use pressure air to dry the breather.
- Check the condition of the hose. Replace the hose if the hose is damaged.
- Install the breather. Install the retaining bolt.
- Install the hose and the breather outlet hose clamp.
- Close the engine compartment access door.
Caterpillar Information System:
545 Wheel Skidder Machine Systems Piston Pump (Implement, Pilot, Steering, Brake) - Disassemble
924Gz Wheel Loader Battery or Battery Cable - Replace
3500B Engines Water Pump - Remove
613C Series II Wheel Tractor-Scraper Air System and Brakes Quick-Release and Holding Valve
3064 and 3066 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Aftercooler
615C Wheel Tractor-Scraper Wheel Tractor-Scraper Power Train Visual Inspection
615C Wheel Tractor-Scraper Wheel Tractor-Scraper Power Train Transmission Hydraulic System
D9R Track-Type Tractor Indicators and Gauges - Test
924Gz Wheel Loader Axle Oscillation Bearings - Lubricate
3500B Engines Water Temperature Regulators - Install
924Gz Wheel Loader Articulation Bearings - Lubricate
D7R Track-Type Tractor Transmission Oil Level - Check
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Air Inlet Heater
615C Wheel Tractor-Scraper Wheel Tractor-Scraper Power Train Selector Valve (Torque Converter Lockup Clutch) - Adjust
613C Series II Wheel Tractor-Scraper Engine Oil Level - Check
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pump - Install
613C Series II Wheel Tractor-Scraper Engine Oil and Filter - Change
613C Series II Wheel Tractor-Scraper Air System and Brakes Brake System
3500B Engines Water Pump (Separate Circuit Aftercooler) - Remove
924Gz Wheel Loader Bucket Lower Pivot Bearings - Lubricate
3500B Engines Water Pump (Separate Circuit Aftercooler) - Install
994D Wheel Loader Engine Supplement Fan Drive (Hydraulic) - Remove
994D Wheel Loader Engine Supplement Fan Drive (Hydraulic) - Install