3500B and 3500B High Displacement Generator Set Engines Caterpillar


MID 036 - CID 0273 - FMI 13 Turbo Outlet Pressure calibration required

Usage:

785C 1HW
产生此代码的情况:

电子控制模块(ECM)检测到以下一种情况。 涡轮增压器压气机出口压力为大气压 ± 15 千帕 (2 磅/平方英寸)。 涡轮增压器出口压力小于 35 千帕 (5 磅/平方英寸)。 涡轮增压器出口压力大于 122 千帕 (17 磅/平方英寸)。 在进行校准的过程中,涡轮增压器出口压力的变化幅度大于 10 千帕 (1.5 磅/平方英寸)。 新 ECM 尚未进行压力校准。 诊断代码 273-03 或 273-04 处于当前状态。

系统响应:

此诊断代码未记录在存储器中。 ECM 会使用先前校准的数据。

测试步骤 1. 进行以下的诊断步骤: 模拟传感器 - 校准

结果:

  • 正常 - 停止

  • 已修复,正常。 - 停止

Caterpillar Information System:

3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0273 - FMI 04 Turbo Outlet Pressure short to ground
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0273 - FMI 03 Turbo Outlet Pressure open/short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0268 - FMI 02 Check Programmable Parameters
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0254 - FMI 12 Electronic Control Module Error
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0253 - FMI 02 Personality Module mismatch
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0168 - FMI 02 System Voltage intermittent/erratic
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0168 - FMI 01 System Voltage Low
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0168 - FMI 00 System Voltage High
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0110 - FMI 04 Engine Coolant Temperature short to ground
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0110 - FMI 03 Engine Coolant Temperature open/short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0101 - FMI 13 Crankcase Pressure calibration required
G3408 and G3412 Engines Magnetic Pickup
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0274 - FMI 03 Atmospheric Pressure open/short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0338 - FMI 05 Pre-Lube Relay open circuit
3500B Engines Fuel Transfer Pump - Assemble
G3408 and G3412 Engines Valve Mechanism
3114, 3116 and 3126 Engines Engine Has Early Wear
3114, 3116 and 3126 Engines Engine Misfires, Runs Rough or Is Unstable
SR500 Generators General Hazard Information
3034 Engine for Caterpillar Built Machines Fuel Shutoff Solenoid - Remove and Install
G3500 Engines Air Inlet Manifold - Remove and Install
G3500 Engines Drive Housing (Front) - Remove and Install
G3500 Engines Air Cleaner - Remove and Install
SR500 Generators Engine Stopping
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.