Housing (Front) - Install
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Thoroughly clean the old gasket material from front plate (2). Install a new gasket (7) on front plate (2) .
Show/hide table
| NOTICE |
|---|
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine. |
Show/hide table
 | |
| Illustration 1 | g00592672 |
Typical example | |
- Thoroughly clean the old gasket material from front housing (1) and install front housing (1) on the two dowel pins.
Show/hide table
 | |
| Illustration 2 | g00592668 |
Typical example | |
- Install bolts (4), nut (5), and nuts (6) on front housing (1) .
Show/hide table
 | |
| Illustration 3 | g00592633 |
Typical example | |
- Install bolts (3) that fasten front plate (2) to front housing (1) .
Show/hide table
 | |
| Illustration 4 | g00592550 |
Typical example | |
End By:
- Install the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
- Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Install".
- Install the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Install".
- Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
- Install the crankshaft front seal and the wear sleeve. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Install".
- Install the camshaft gear. Refer to Disassembly and Assembly, "Camshaft Gear - Remove and Install".
Caterpillar Information System:
3406E Marine Engine Flywheel Housing
3406E Generator Set Engines Engine Shutoffs and Engine Alarms
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Piston Cooling Jet
3406E Marine Engine Auxiliary Water Pump
3406E Marine Engine Engine Oil Pan
3500B Engines Water Pump - Assemble
3406E Marine Engine Exhaust Manifold
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3500B Engines Water Pump - Disassemble
G3606 and G3608 Engines Gas Pressure Regulator - Disassemble
3406E and 3456 Generator Set Engines Housing (Front) - Remove
3406E Generator Set Engines Gauges and Indicators
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0546 - FMI 06 Ether Hold Relay short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0546 - FMI 05 Ether Hold Relay open/short to ground
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Inlet Manifold - Remove - 3013, 3014, and 3024 Engines
3500B and 3500B High Displacement Generator Set Engines Alternator
3406E and C15 Marine Engines Air Starting Motor Pressure Regulating Valve
3406E and 3456 Generator Set Engines Water Pump - Remove
3500B and 3500B High Displacement Generator Set Engines Self-Diagnostics
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Part Number Location
3034 Engine for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3500B Engines and 3500 Engines with EUI Option Electronic Display Module
3406E and 3456 Generator Set Engines Water Pump - Install
3406E Marine Engine Circuit Breakers