Front Cover - Remove
Removal Procedure
Start By:
- Remove the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Remove".
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove button head screws (3), bolts (1), and nuts (4) .
Show/hide table
 | |
| Illustration 1 | g00591716 |
- Remove front cover (2) .
- Remove seal (5) from front cover (2) .
Show/hide table
 | |
| Illustration 2 | g00579317 |
Caterpillar Information System:
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0248 - FMI 09 Cat Data Link not communicating
3304B and 3306B Engines for Caterpillar Built Machines Cylinder Head - Install
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0274 - FMI 13 Atmospheric Pressure calibration required
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0274 - FMI 04 Atmospheric Pressure short to ground
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0263 - FMI 04 Digital Sensor Supply short to ground
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0263 - FMI 03 Digital Sensor Supply short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0262 - FMI 03 5 Volt Sensor DC Power Supply short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0262 - FMI 04 5 Volt Sensor DC Power Supply short to ground
G3500 Engines Engine Oil Cooler - Remove
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Cylinder Block
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Pump - Remove
3500B Engines Engine Oil Filter Housing - Assemble
G3500 Engines Engine Oil Cooler - Install
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0545 - FMI 06 Ether Start Relay short to ground
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0545 - FMI 05 Ether Start Relay open/short to +batt
3500B Engines Engine Oil Cooler - Disassemble
3500B Engines Engine Oil Cooler - Assemble
G3500 Engines Engine Oil Pump - Remove
3406E and 3456 Generator Set Engines Front Cover - Install
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0827 - FMI 08 Left Exhaust Temperature signal abnormal
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0261 - FMI 13 Engine Timing calibration required
G3500 Engines Engine Oil Pump - Install
3408E and 3412E Engines for Caterpillar Built Machines Compression - Test
G3500 Engines Engine Oil Pump - Disassemble