3406E and 3456 Generator Set Engines Caterpillar


Rocker Arm and Shaft - Install

Usage:

MTC855 818

Installation Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     124-2946     Lifting Bracket     1    


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.





    Illustration 1g00517457



    Illustration 2g00517442



    Illustration 3g01325993

  1. Install rocker shaft (3) , valve rocker arms (1) , and unit injector rocker arms (4) as a unit with Tooling (A) .

    Note: Install rocker shaft (3) with the flat side facing upward.

    Note: Apply clean engine oil to the underside of the bolt heads prior to installation.

  1. Install bolts (2) and tighten to a torque of 50 ± 5 N·m (37 ± 4 lb ft). Turn bolts (2) for an additional 45 ± 5 degrees. Tighten the bolts in the following sequence: 2, 3, 1, 4.

  1. Repeat Steps 1 and 2 for the remainder of the rocker arm assemblies.

End By: Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".

Caterpillar Information System:

3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0002 - FMI 05 Injector Cylinder 2 open circuit
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0001 - FMI 06 Injector Cylinder 1 short
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
3512B and 3516B Engines Air Inlet and Exhaust Lines
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0001 - FMI 05 Injector Cylinder 1 open circuit
3406E and 3456 Generator Set Engines Rocker Arm and Shaft - Remove
G3500 Engines Rocker Shaft and Push Rod - Install
G3500 Engines Rocker Shaft and Push Rod - Remove
G3500 Engines Engine Oil and Water Pump Drive - Install
G3500 Engines Engine Oil and Water Pump Drive - Remove
120H and 135H Motor Graders Power Train Final Drive - Assemble
3500 Engines Exhaust Manifold
G3500 Engines Engine Oil Filter Housing - Remove
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0002 - FMI 06 Injector Cylinder 2 short
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0003 - FMI 05 Injector Cylinder 3 open circuit
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0003 - FMI 06 Injector Cylinder 3 short
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0004 - FMI 05 Injector Cylinder 4 open circuit
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0004 - FMI 06 Injector Cylinder 4 short
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0005 - FMI 05 Injector Cylinder 5 open circuit
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0005 - FMI 06 Injector Cylinder 5 short
3500B Engines Engine Oil Filter Housing - Disassemble
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0006 - FMI 05 Injector Cylinder 6 open circuit
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0006 - FMI 06 Injector Cylinder 6 short
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0007 - FMI 05 Injector Cylinder 7 open circuit
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.