Rocker Arm and Shaft - Remove
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 124-2946 | Lifting Bracket | 1 |
Start By:
- Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (2) .
Show/hide table
 | |
| Illustration 1 | g00517442 |
Typical example | |
Show/hide table
 | |
| Illustration 2 | g00517462 |
Show/hide table
 | |
| Illustration 3 | g00517457 |
Show/hide table
 |
Valve rocker arms and unit injector rocker arms can move on the shaft after the bolts have been removed. The shaft should be kept level when removed from the cylinder head. To avoid possible personal injury, keep fingers clear of the valve rocker arms and the unit injector rocker arms when lifting the assembly from the cylinder head. |
 |
- Remove shaft (3), valve rocker arms (1), and unit injector rocker arms (4) as a unit with Tooling (A) .
- Repeat Steps 1 and 2 for the remainder of the rocker arm assemblies.
Caterpillar Information System:
G3500 Engines Rocker Shaft and Push Rod - Install
G3500 Engines Rocker Shaft and Push Rod - Remove
G3500 Engines Engine Oil and Water Pump Drive - Install
G3500 Engines Engine Oil and Water Pump Drive - Remove
120H and 135H Motor Graders Power Train Final Drive - Assemble
3500 Engines Exhaust Manifold
3406E Generator Set Engines Model View Illustrations
12H, 140H and 160H Motor Graders Power Train Final Drive - Disassemble
3508B Engine for Caterpillar Built Machines Turbocharger
Electronic Modular Control Panel II+ (EMCP II+) Parallel Setpoint Tuning OP-11
3500B Engines for Caterpillar Built Power Modules Turbocharger
G3606 and G3608 Engines Connecting Rod Bearings - Remove and Install
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0001 - FMI 05 Injector Cylinder 1 open circuit
3512B and 3516B Engines Air Inlet and Exhaust Lines
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0001 - FMI 06 Injector Cylinder 1 short
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0002 - FMI 05 Injector Cylinder 2 open circuit
3406E and 3456 Generator Set Engines Rocker Arm and Shaft - Install
G3500 Engines Engine Oil Filter Housing - Remove
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0002 - FMI 06 Injector Cylinder 2 short
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0003 - FMI 05 Injector Cylinder 3 open circuit
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0003 - FMI 06 Injector Cylinder 3 short
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0004 - FMI 05 Injector Cylinder 4 open circuit
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0004 - FMI 06 Injector Cylinder 4 short