G3500 Engines Caterpillar


Engine Oil and Water Pump Drive - Install

Usage:

G3508 2TJ

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.


  1. Ensure that the O-ring seals are installed in the grooves of the adapter assemblies. Also apply clean engine oil to the O-ring seals.


    Illustration 1g00590550
    Typical example

  2. Install front adapter assembly (3) and bolts (4).


    Illustration 2g00590549
    Typical example

  3. Install rear adapter assembly (2) and bolts (1).

End By:

  1. Install the water pump. Refer to Disassembly and Assembly, "Water Pump - Install".

  2. Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".

Caterpillar Information System:

G3500 Engines Engine Oil and Water Pump Drive - Remove
120H and 135H Motor Graders Power Train Final Drive - Assemble
3500 Engines Exhaust Manifold
3406E Generator Set Engines Model View Illustrations
12H, 140H and 160H Motor Graders Power Train Final Drive - Disassemble
3508B Engine for Caterpillar Built Machines Turbocharger
Electronic Modular Control Panel II+ (EMCP II+) Parallel Setpoint Tuning OP-11
3500B Engines for Caterpillar Built Power Modules Turbocharger
G3606 and G3608 Engines Connecting Rod Bearings - Remove and Install
3500B Engines Turbocharger
Installation of 185-7733 Sensor Kit {1928} Installation of 185-7733 Sensor Kit {1928}
G3606 and G3608 Engines Prechamber Check Valve - Remove and Install
G3500 Engines Rocker Shaft and Push Rod - Remove
G3500 Engines Rocker Shaft and Push Rod - Install
3406E and 3456 Generator Set Engines Rocker Arm and Shaft - Remove
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0001 - FMI 05 Injector Cylinder 1 open circuit
3512B and 3516B Engines Air Inlet and Exhaust Lines
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0001 - FMI 06 Injector Cylinder 1 short
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0002 - FMI 05 Injector Cylinder 2 open circuit
3406E and 3456 Generator Set Engines Rocker Arm and Shaft - Install
G3500 Engines Engine Oil Filter Housing - Remove
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0002 - FMI 06 Injector Cylinder 2 short
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0003 - FMI 05 Injector Cylinder 3 open circuit
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.