General Information
Show/hide table
 | |
| Illustration 1 | g00585231 |
R2.0 Series Reduction Starting Motor (1) Motor terminal lead wire (2) Solenoid (3) Case of the starting motor (4) Drive end housing (5) Brush springs (6) Brushes (7) Brush holder (8) Armature (9) Overrunning clutch (10) Steel ball (11) Armature reduction gear (12) Idler gear (13) Retainer (14) Roller (15) Return spring | |
Note: The following information is for the disassembly and assembly of a "R2.0 series" starting motor. All other series of starting motors are similar.
Caterpillar Information System:
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors Component Description
3500 and 3500B Engines Manual Stop Procedure
3500 and 3500B Engines Emergency Stopping
G3520C and G3520E Engines Auxiliary Drive (Lower Left Hand)
3500 and 3500B Engines Starting the Engine
3500 and 3500B Engines Fan Drive Bearing - Lubricate
3500B Locomotive Engines Engine Air Cleaner Differential Pressure - Check
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Valve Mechanism Cover
797 Off-Highway Truck Hydraulic System Relief Valve (Hoist Cylinder Rod End) - Test and Adjust
C-9 Engines for Caterpillar Built Machines Turbocharger - Inspect
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Air Cleaner
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors Initial Troubleshooting Procedure
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors No Load - Test
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors Normal Operation
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors Starting Motor - Assemble
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors Starting Motor - Disassemble
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors Starting Motor - Troubleshoot
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Auxiliary Water Pump
3126B Marine Engine Air Inlet and Exhaust System
3126B Marine Engine Lubrication System
3126B Marine Engine Cooling System
3034 Engine for Caterpillar Built Machines Coolant Temperature Switch - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Air Inlet Elbow