3408E and 3412E Engines for Caterpillar Built Machines Caterpillar


Water Pump - Install

Usage:

769C 01X

安装步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。


注: 检查密封垫和 O 形密封圈的状况。 如果密封垫或 O 形密封圈磨损或损坏,则用新零件更换。

注: 有关水泵的更多信息,请参阅技术规格, "水泵"。



    图 1g00578978

  1. 将密封件和水泵 (11) 放置到发动机上。 安装螺母 (8) 和螺栓 (9)。

  2. 安装密封垫和螺栓 (10)。


    图 2g00578980

  3. 使用密封垫、密封件和法兰 (6) 将弯管 (5) 放置到位。 使用甘油稍微润滑孔和密封件。 安装螺栓 (4)。

  4. 安装螺栓 (7)。


    图 3g00578974

  5. 将 O 形密封圈和管 (3) 放置到发动机上。 使用甘油稍微润滑孔和密封件。

  6. 将密封垫和弯管 (1) 放置到位。 安装螺栓 (2)。

  7. 向冷却系统加注冷却液到正确的液位。 请参阅操作和保养手册, "加注容量"。

Caterpillar Information System:

CIPI UNDERCARRIAGE Arrangements: 9Q5221, 9Q5234, 9Q5243, 9Q5245, 9Q5246, 9Q5247, 9Q5385, 9Q5433, 9Q5482, 9Q5622, 9Q5661, 9Q5719, 9Q5720, 9Q5721, 9Q5722, 9Q5830, 9Q5840, 9Q5857, 9Q5874, 9Q5883, 9Q5930 and 9Q5940 Final Drive
584 and 584HD Forwarders Work Tools
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Final Drive
Generator Set Control Panel for Switchgear Conversion Modes of Operation
3034 Engine for Caterpillar Built Machines Flywheel Housing - Remove and Install
3176B Industrial Engine Sensors and Electrical Components
3612 and 3616 Engines Prelube Pump
3612 and 3616 Engines Prelube Pump
G3500 Engines Cylinder Liner - Install
797 Off-Highway Truck Power Train Differential and Bevel Gear
3034 Engine for Caterpillar Built Machines Flywheel - Install
3406E Generator Set Engines Information Plate
G3500 Engines Camshaft Bearings - Remove
G3500 Engines Camshaft Bearings - Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Fuel Filter and Water Separator
Alignment Procedure for G3500 Tandem Generator Sets{4450} Alignment Procedure for G3500 Tandem Generator Sets{4450}
784C and 785C Off-Highway Trucks Machine Systems Duo-Cone Seals - Install
3034 Engine for Caterpillar Built Machines Glow Plugs - Remove and Install
3412E, C30 and C32 Marine Engines Flywheel Housing - Remove and Install
3034 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
3612 and 3616 Engines Exhaust Manifold
3126B Marine Engine Engine Design
3126B Marine Engine General Information
3408E and 3412E Engines for Caterpillar Built Machines Aftercooler - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.