Connecting Rod Bearings - Remove
Start By:
- Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Turn the crankshaft until the connecting rod bearing caps are accessible.
- Check the connecting rod and the connecting rod bearing caps for identification and for the location.
- Remove bolts (1) and the connecting rod bearing cap from the connecting rod. Remove the lower half of the connecting rod bearing from the connecting rod bearing cap.
- Push the connecting rod away from the crankshaft. Remove the upper half of the connecting rod bearing from the connecting rod.
- Repeat Steps 1 through 4 for the removal of the remainder of the connecting rod bearings.
Show/hide table
| |
| Illustration 1 | g00506275 |
Caterpillar Information System:
3408E and 3412E Engines for Caterpillar Built Machines Air in Fuel - Test
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger - Remove
3408E and 3412E Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
G3500 Engines Crankshaft Main Bearings - Install
3406E On-Highway Engine Pistons and Connecting Rods - Remove
3500B High Displacement Generator Set Engines Model View Illustrations
3600 Distillate Fuel Engines Product Description
G3500 Engines Crankshaft Main Bearings - Remove
3034 Engine for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
3034 Engine for Caterpillar Built Machines Electric Starting Motor - Remove and Install
3612 and 3616 Engines Exhaust Manifold
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Fuel Filter Base
3406E On-Highway Engine Connecting Rod Bearings - Install
3500 and 3500B Engines Control Panel
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
Generator Set Control Panel for Switchgear Conversion General Information
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger - Install
3406E On-Highway Engine Crankshaft Main Bearings - Install
Electronic Modular Control Panel II+ (EMCP II+) for EUI Engines SP Fault Code - Troubleshoot
G3500 Engines Camshaft - Remove
G3500 Engines Camshaft - Install
3612 and 3616 Engines Exhaust Manifold
3176B Industrial Engine Engine Description