3054 Engine for Caterpillar Built Machines Caterpillar

Removal Procedure

Start By:

1. Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove".

Note: For a complete description of Type 1 and Type 2 Engines, refer to the Disassembly and Assembly, "Engine Design" topic.

Show/hide table



Illustration 1	g00542541
Typical example

1. Remove exhaust manifold nuts (1) .

2. Remove exhaust manifold (2) and the gasket.

Installation Procedure

Show/hide table



Illustration 2	g00542541
Typical example

1. Inspect the condition of the gasket. Replace the gasket, if necessary.

2. Install the gasket and exhaust manifold (2) .

3. Install exhaust manifold nuts (1). Tighten the plated nuts to a torque of 44 N·m (32 lb ft). Tighten the nuts that are not plated to a torque of 50 N·m (37 lb ft).

End By: Install the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Install".