Lifter Group - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-7262 | Telescoping Magnet | 1 |
Start By:
- Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to remove lifters (1).
Note: Ensure that the lifters are marked with the appropriate cylinder number for installation purposes.
Show/hide table
Illustration 1 | g00540954 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-7262 | Telescoping Magnet | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to install lifters (1).
Note: Ensure that the lifters are seated correctly and that the lifters are in the correct cylinders.
Show/hide table
Illustration 2 | g00540954 |
End By:
- Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Caterpillar Information System:
Control Console For CPS361 Pumper, Cement Control Panel
G3408 and G3412 Engines Water Pump
797 Off-Highway Truck Steering System Steering Control Valve
3412E, C30 and C32 Marine Engines Heat Exchanger - Remove
G3408 and G3412 Engines Engine Oil Pan
G3606 and G3608 Engines Vibration Damper - Remove
3054 and 3056 Industrial and Generator Set Engines Fuel System
3406C (PEEC III) Truck Engines Electrical System
3176C Industrial Engine Turbocharger - Install
3176C Industrial Engine Turbocharger - Remove
3612 and 3616 Engines Priority Valve - Assemble
3612 and 3616 Engines Priority Valve - Disassemble
SR4 HV and SR4B HV Generators Winding - Test
G3408 and G3412 Engines Vibration Damper
3054 Engine for Caterpillar Built Machines Gear Group (Front) - Remove
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Block
3054 Engine for Caterpillar Built Machines Gear Group (Front) - Install
3054 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
3412E, C30 and C32 Marine Engines Heat Exchanger - Install
G3606 and G3608 Engines Vibration Damper - Install
G3408 and G3412 Engines Electric Starting Motor
SR4 HV and SR4B HV Generators General Maintenance Information
G3606 and G3608 Engines Vibration Damper - Disassemble
3406C (PEEC III) Truck Engines Engine Design