3408E and 3412E Engines for Caterpillar Built Machines Caterpillar


Front Cover - Install

Usage:

769C 01X

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g00553898
    Typical example

  1. Clean the mating surfaces of the front housing and front cover (2).

  2. Install a new gasket.

  3. Install front cover (2) and secure the cover with ten bolts (1).

  4. Apply 7M-7456 Compound to the threads of stud (3). Install the nut on stud (3).


    Illustration 2g00555863

  5. Install nut (4) and the washer. Tighten nut (4) to a torque of 35 ± 5 N·m (26 ± 4 lb ft).

End By:

  1. Install the fuel filter base. Refer to Disassembly and Assembly, "Fuel Filter Base - Remove and Install".

Caterpillar Information System:

G3606 and G3608 Engines Oil Temperature Regulators - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Camshaft
Generator Set Control Panel for Switchgear Conversion Indicator for Overcrank - Troubleshoot
Generator Set Control Panel for Switchgear Conversion Main Display Module Initialization - Adjust
3608 Engine Engine Oil Pan - Assemble
Generator Set Control Panel for Switchgear Conversion Module - Replace
Generator Set Control Panel for Switchgear Conversion System Self Test
Jacket Water Heaters, Lube Oil Heaters, and Combination Heaters for G3600, 3600, and C280 Engines Electrical System Schematic
Generator Set Control Panel for Switchgear Conversion Scroll Switch - Troubleshoot
3054 Engine for Caterpillar Built Machines Engine Oil Filter Base - Assemble
Control Console For CPS361 Pumper, Cement General Information
3054 Engine for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
Control Console For CPS361 Pumper, Cement Control Console
3054 and 3056 Industrial and Generator Set Engines Piston and Rings
Control Console For CPS361 Pumper, Cement Instrument Panel
3054 Engine for Caterpillar Built Machines Crankshaft Main Bearings - Install
SR4 HV and SR4B HV Generators Rotating Rectifier - Test
3054 and 3056 Industrial and Generator Set Engines Cylinder Block
Generator Set Control Panel for Switchgear Conversion Indicator for High Water Temperature - Troubleshoot
3054 and 3056 Industrial and Generator Set Engines Piston Cooling Jet
Generator Set Control Panel for Switchgear Conversion Indicator for Low Oil Pressure - Troubleshoot
Generator Set Control Panel for Switchgear Conversion Indicator for Engine Overspeed - Troubleshoot
Generator Set Control Panel for Switchgear Conversion Indicator for Emergency Stop - Troubleshoot
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.