3054 Engine for Caterpillar Built Machines Caterpillar


Engine Oil Filter Base - Assemble

Usage:

554 1AM


Assembly Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.





    Illustration 1g00554208

    Typical example

  1. Install engine oil cooler (4) on engine oil filter base (2) .

  1. Place cap (3) on engine oil cooler (4) (if equipped).

  1. Install engine oil filter (1) on engine oil filter base (2) .

End By: Install the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Install".

Caterpillar Information System:

3054 Engine for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
3054 Engine for Caterpillar Built Machines Engine Oil Filter Base - Install
Generator Set Control Panel for Switchgear Conversion LH/RH Switch - Troubleshoot
3054 Engine for Caterpillar Built Machines Engine Oil Filter Base - Remove
Generator Set Control Panel for Switchgear Conversion Initial Troubleshooting Procedure
3054 Engine for Caterpillar Built Machines Cylinder Liner - Install
3054 Engine for Caterpillar Built Machines Cylinder Liner - Remove
Generator Set Control Panel for Switchgear Conversion Troubleshooting Diagnostic Codes
SR4 HV and SR4B HV Generators Insulation - Test
3054 and 3056 Industrial and Generator Set Engines Water Outlet Manifold - Install
3054 and 3056 Industrial and Generator Set Engines Water Outlet Manifold - Remove
Generator Set Control Panel for Switchgear Conversion Accessing Diagnostic Information
Generator Set Control Panel for Switchgear Conversion Scroll Switch - Troubleshoot
Jacket Water Heaters, Lube Oil Heaters, and Combination Heaters for G3600, 3600, and C280 Engines Electrical System Schematic
Generator Set Control Panel for Switchgear Conversion System Self Test
Generator Set Control Panel for Switchgear Conversion Module - Replace
Generator Set Control Panel for Switchgear Conversion Main Display Module Initialization - Adjust
Generator Set Control Panel for Switchgear Conversion Indicator for Overcrank - Troubleshoot
3054 and 3056 Industrial and Generator Set Engines Camshaft
3054 and 3056 Industrial and Generator Set Engines Piston and Rings
3054 Engine for Caterpillar Built Machines Crankshaft Main Bearings - Install
SR4 HV and SR4B HV Generators Rotating Rectifier - Test
3054 and 3056 Industrial and Generator Set Engines Cylinder Block
Generator Set Control Panel for Switchgear Conversion Indicator for High Water Temperature - Troubleshoot
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.