Pistons and Connecting Rods - Disassemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-6683 | Ring Expander | 1 |
B | 1P-1857 | Retaining Ring Pliers | 1 |
Start By:
- Remove the pistons and the connecting rods. Refer to Disassembly and Assembly, "Piston and Connecting Rods - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) in order to remove three piston rings (1) from piston (2).
Show/hide table
Illustration 2 g00551460 Typical example - Use Tooling (B) in order to remove retaining rings (3) that hold the piston pin in position.
- Remove piston pin (4) from the piston.
Note: If the piston pin cannot be removed by hand, heat the piston to a temperature of
45 ± 5 °C (113 ± 9 °F) . Do not use a torch to heat the piston. - Remove bearing (5) from connecting rod (6).
Show/hide table
Illustration 3 g00893862 - Use a suitable press and a suitable adapter in order to remove piston pin bushing (7) from connecting rod (6).
Show/hide table
Illustration 1 | g00551459 |
Typical example |
Caterpillar Information System:
3406E Truck Engine Boost Pressure Sensor
3408E and 3412E Engines for Caterpillar Built Machines Fuel Temperature Sensor
3406E Truck Engine Coolant Temperature Sensor
G3606 and G3608 Engines Engine Oil Coolers - Remove
3412E and C30 Marine Engines Fuel Related Components in Cold Weather
3412E and C30 Marine Engines Emergency Stopping
3412E and C30 Marine Engines Starting the Engine
G3606 and G3608 Engines Engine Oil Pump - Assemble
3600 and C280 Diesel Engine Fluids Recommendations Field Evaluation of Commercial Oil
3406E and 3456 Engines for Caterpillar Built Machines Front Housing and Covers
3126 Truck Engine (Military) Engine Oil
3054 Engine for Caterpillar Built Machines Connecting Rod Bearings - Remove
G3606 and G3608 Engines Engine Oil Coolers - Install
3054 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Belt Tightener - Remove
3054 Engine for Caterpillar Built Machines Connecting Rod Bearings - Install
Generator Set Control Panel for Switchgear Conversion Main Display Module
Generator Set Control Panel for Switchgear Conversion Quad Gauge Module
Generator Set Control Panel for Switchgear Conversion Fuses
Generator Set Control Panel for Switchgear Conversion Switches
Generator Set Control Panel for Switchgear Conversion Senders
SPP101 Skid Mounted Pumper Cooling System Water Temperature Regulator - Replace
3512B and 3516B Engine Supplement for and 784C,, 785C and and 785C HAA Off-Highway Truck/Tractors Belt Tightener - Install
Generator Set Control Panel for Switchgear Conversion Sensors