Engine Oil Cooler Bypass Valve - Remove and Install
Show/hide table
| 注意 |
|---|
|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
Show/hide table
 |
|
弹簧加压的零件和/或盖板可能导致人身伤害。 拆卸盖板时弹簧力将被释放。 松动螺栓时做好准备把持住弹簧加载的盖板。 |
- 固定端盖 (1) 的同时，缓慢拆下两条螺栓 (2) 和垫圈。 拆下盖 (1) 和密封垫。
Show/hide table
图 2 g00548724 典型实例 - 将弹簧 (3) 和柱塞 (4) 从机油冷却器上拆下。
Show/hide table
| |
| 图 1 | g00548723 |
|
典型实例 | |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 利用干净的机油轻轻润滑柱塞 (4) 和弹簧 (3)。
- 将弹簧 (3) 和柱塞 (4) 安装到机油冷却器中。
Show/hide table
图 4 g00548723 典型实例 - 将新密封垫安装到端盖 (1) 的下方。 安装端盖 (1) 并上紧螺栓 (2)。
Show/hide table
| |
| 图 3 | g00548724 |
|
典型实例 | |
Caterpillar Information System:
Generator Set Control Panel for Switchgear Conversion CID 0263 FMI 03 Sensor Power Supply Voltage Above Normal - Test
Generator Set Control Panel for Switchgear Conversion Alert Indicator - Troubleshoot
3054 Engine for Caterpillar Built Machines Crankshaft Gear - Remove and Install
3054 Engine for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
Generator Set Control Panel for Switchgear Conversion Alarm Silence Switch - Troubleshoot
Generator Set Control Panel for Switchgear Conversion Alert Indicator Description
3408E and 3412E Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Temperature Sensor - Remove and Install
3606 and 3608 Engines General Information (Fuel System)
3408E and 3412E Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
Generator Set Control Panel for Switchgear Conversion Action Alarm and Alarm Silence Switch
3408E and 3412E Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
G3408 and G3412 Engines Cylinder Liner
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
Generator Set Control Panel for Switchgear Conversion CID 0271 FMI 03 Alarm (Action) Voltage Above Normal - Test
3116 and 3126 Marine Engines Heat Exchanger - Inspect
Generator Set Control Panel for Switchgear Conversion CID 0271 FMI 05 Alarm (Action) Current Below Normal - Test
3606 and 3608 Engines Restriction of Air Inlet and Exhaust
G3408 and G3412 Engines Flywheel
G3408 and G3412 Engines Gas Pressure Regulator
G3408 and G3412 Engines Magneto
3116 and 3126 Marine Engines Turbocharger - Inspect
G3408 and G3412 Engines Governor
G3408 and G3412 Engines Governor Control