Speed/Timing Sensor - Remove and Install
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 断开转速/正时传感器接头 (1)。
- 拆下导线系带 (2)。
- 拆下发动机转速 / 正时传感器 (3)。
Show/hide table
图 1 | g00546537 |
发动机的右侧 主转速/正时传感器 |
Show/hide table
图 2 | g00546599 |
发动机左侧 辅助转速/正时传感器 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
Show/hide table
注意 |
---|
转速/正时传感器必须安装到正确的深度才能正常工作。 转速/正时传感器和壳体(前)上必须无任何异物才能确保正确的转速/正时传感器安装深度。 |
- 将转速/正时传感器 (3) 安装到前壳体中。 将转速/正时传感器上紧到
40 ± 5 N·m (30 ± 4 lb ft) 的扭矩。 - 通过安装导线系带 (2) 固定导线。
- 连接转速/正时传感器接头 (1)。
Show/hide table
图 3 | g00546537 |
发动机的右侧 主转速/正时传感器 |
Show/hide table
图 4 | g00546599 |
发动机左侧 辅助转速/正时传感器 |
注: 安装前,转速/正时传感器的滑动头必须完全伸出。
注: 安装前,利用干净的机油轻轻润滑转速/正时传感器的螺纹。
Caterpillar Information System:
G3606 and G3608 Engines Prelubrication Oil Pump - Assemble
3600 and C280 Diesel Engine Fluids Recommendations Crude Fuel Oil
3054 and 3056 Industrial and Generator Set Engines Water Pump - Assemble
Electronic Modular Control Panel II+ (EMCP II+) Block Diagram of Generator Set Control
EMCPII+ for Gas Engines Connector Contact Identification of Generator Set Control
3406C (PEEC III) Truck Engines Fuel System
3612 and 3616 Fast Vessel Engines Maintenance Records
3412E and C30 Marine Engines Fuel System
797 Off-Highway Truck Braking System Hydraulic Tank Mounting
3412E and C30 Marine Engines Lubrication System
3054 Engine for Caterpillar Built Machines Camshaft Bearings - Remove and Install
G3606 and G3608 Engines Prelubrication Oil Pump - Disassemble
3612 and 3616 Fast Vessel Engines Cooling System Coolant (ELC) - Change
Electronic Modular Control Panel II+ (EMCP II+) Pulse Width Modulated (PWM) Sensor - Test
3054 and 3056 Industrial and Generator Set Engines Water Temperature Regulator - Remove and Install
3054 Engine for Caterpillar Built Machines Camshaft - Remove and Install
3054 Engine for Caterpillar Built Machines Flywheel - Remove
Guidelines For 3600 Heavy Fuel Oil (HFO) Engines{1000} Guidelines For 3600 Heavy Fuel Oil (HFO) Engines{1000}
3054 Engine for Caterpillar Built Machines Flywheel - Install
3054 and 3056 Industrial and Generator Set Engines Front Cover - Remove and Install
G3606 and G3608 Engines Lubrication Metering Pump - Remove and Install
3054 Engine for Caterpillar Built Machines Front Cover - Install
G3606 and G3608 Engines Engine Oil Pump - Remove
3054 Engine for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install