797 Off-Highway Truck Braking System Caterpillar


Hydraulic Tank Mounting

Usage:

797 5YW



Ilustrasi 1g00546359

(1) Torsi untuk baut pemasangan ... 900 ± 100 N·m (664 ± 74 lb ft)

(2) Shim Pack 8X-2576

Ketebalan Shim Pack ... 1,64 mm (0,065 inch)

Catatan: Sambungkan tutup ke rangka dengan menggunakan baut tanpa adanya tangki hidrolik pada tempatnya. Ukur diameter vertikal. Ukur diameter susunan pipa pada tangki hidrolik. Kurangi hasil pengukuran pertama dengan hasil pengukuran kedua. Pasang shim pada masing-masing baut sehingga celah menjadi sama dengan 0,00 to - 0,12 mm (0,000 to - 0,005 inch).

Caterpillar Information System:

3412E and C30 Marine Engines Lubrication System
3054 Engine for Caterpillar Built Machines Camshaft Bearings - Remove and Install
G3606 and G3608 Engines Prelubrication Oil Pump - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump Drive - Install
G3606 and G3608 Engines Prelubrication Oil Pump - Install
3054 Engine for Caterpillar Built Machines Water Pump - Install
Electronic Modular Control Panel II+ (EMCP II+) Schematics and Wiring Diagrams
3054 and 3056 Industrial and Generator Set Engines Water Pump - Disassemble
G3606 and G3608 Engines Prelubrication Oil Pump - Remove
Caterpillar On-Highway Diesel Engine Fluids Recommendations Conventional Coolant/Antifreeze Cooling System Maintenance
3054 Engine for Caterpillar Built Machines Water Pump - Remove
3054 Engine for Caterpillar Built Machines Engine Oil Pump - Install
3412E and C30 Marine Engines Fuel System
3612 and 3616 Fast Vessel Engines Maintenance Records
3406C (PEEC III) Truck Engines Fuel System
EMCPII+ for Gas Engines Connector Contact Identification of Generator Set Control
Electronic Modular Control Panel II+ (EMCP II+) Block Diagram of Generator Set Control
3054 and 3056 Industrial and Generator Set Engines Water Pump - Assemble
3600 and C280 Diesel Engine Fluids Recommendations Crude Fuel Oil
G3606 and G3608 Engines Prelubrication Oil Pump - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install
3612 and 3616 Fast Vessel Engines Cooling System Coolant (ELC) - Change
Electronic Modular Control Panel II+ (EMCP II+) Pulse Width Modulated (PWM) Sensor - Test
3054 and 3056 Industrial and Generator Set Engines Water Temperature Regulator - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.