3054 Engine for Caterpillar Built Machines Caterpillar


Water Pump - Install

Usage:

554 1AM

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.


  1. Inspect the condition of the gasket. Replace the gaskets, if necessary.



    Illustration 1g00556675

    Typical example

  1. Install the gasket and water pump (3) to the front housing.

  1. Install eight bolts (1) and install two nuts (2) that fasten the water pump (3) to the front housing.

  1. Fill the cooling system. If the engine uses diesel engine antifreeze/coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change". If the engine uses extended life coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".

Caterpillar Information System:

Electronic Modular Control Panel II+ (EMCP II+) Schematics and Wiring Diagrams
3054 and 3056 Industrial and Generator Set Engines Water Pump - Disassemble
G3606 and G3608 Engines Prelubrication Oil Pump - Remove
Caterpillar On-Highway Diesel Engine Fluids Recommendations Conventional Coolant/Antifreeze Cooling System Maintenance
3054 Engine for Caterpillar Built Machines Water Pump - Remove
3054 Engine for Caterpillar Built Machines Engine Oil Pump - Install
3600 Heavy Fuel Engines Metal Particle Detector - Inspect
G3606 and G3608 Engines Water Manifold - Remove and Install
3412E and C30 Marine Engines Electronic Control System
3054 Engine for Caterpillar Built Machines Alternator - Remove and Install
3054 Engine for Caterpillar Built Machines Engine Oil Pump - Remove
3612 and 3616 Fast Vessel Engines Air Shutoff - Test
G3606 and G3608 Engines Prelubrication Oil Pump - Install
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump Drive - Install
G3606 and G3608 Engines Prelubrication Oil Pump - Disassemble
3054 Engine for Caterpillar Built Machines Camshaft Bearings - Remove and Install
3412E and C30 Marine Engines Lubrication System
797 Off-Highway Truck Braking System Hydraulic Tank Mounting
3412E and C30 Marine Engines Fuel System
3612 and 3616 Fast Vessel Engines Maintenance Records
3406C (PEEC III) Truck Engines Fuel System
EMCPII+ for Gas Engines Connector Contact Identification of Generator Set Control
Electronic Modular Control Panel II+ (EMCP II+) Block Diagram of Generator Set Control
3054 and 3056 Industrial and Generator Set Engines Water Pump - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.