Water Pump - Disassemble
Disassembly Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 6V-3009 | Crossbar | 1 |
| 5H-9976 | Screw | 1 | |
| 9S-9152 | Bearing Puller | 1 | |
| 7X-0290 | Bolt | 2 | |
Start By:
- Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove".
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove six bolts (1) from cover (2). Remove cover (2) and the gasket.
Show/hide table
 | |
| Illustration 1 | g00546103 |
- Remove O-ring seal (3) from the rear of the water pump housing.
Show/hide table
 | |
| Illustration 2 | g00546104 |
- Install Tool (A). Remove gear (4) .
Show/hide table
 | |
| Illustration 3 | g00546126 |
- Use a suitable lever in order to remove seal (5) .
Show/hide table
 | |
| Illustration 4 | g00546127 |
- Use a suitable press to remove shaft (6), seal (7), and impeller (8) from housing (9) .
Show/hide table
 | |
| Illustration 5 | g00546128 |
Caterpillar Information System:
G3606 and G3608 Engines Prelubrication Oil Pump - Remove
Caterpillar On-Highway Diesel Engine Fluids Recommendations Conventional Coolant/Antifreeze Cooling System Maintenance
3054 Engine for Caterpillar Built Machines Water Pump - Remove
3054 Engine for Caterpillar Built Machines Engine Oil Pump - Install
3600 Heavy Fuel Engines Metal Particle Detector - Inspect
G3606 and G3608 Engines Water Manifold - Remove and Install
3412E and C30 Marine Engines Electronic Control System
3054 Engine for Caterpillar Built Machines Alternator - Remove and Install
3054 Engine for Caterpillar Built Machines Engine Oil Pump - Remove
3612 and 3616 Fast Vessel Engines Air Shutoff - Test
3054 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump Drive - Remove
Electronic Modular Control Panel II+ (EMCP II+) Schematics and Wiring Diagrams
3054 Engine for Caterpillar Built Machines Water Pump - Install
G3606 and G3608 Engines Prelubrication Oil Pump - Install
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump Drive - Install
G3606 and G3608 Engines Prelubrication Oil Pump - Disassemble
3054 Engine for Caterpillar Built Machines Camshaft Bearings - Remove and Install
3412E and C30 Marine Engines Lubrication System
797 Off-Highway Truck Braking System Hydraulic Tank Mounting
3412E and C30 Marine Engines Fuel System
3612 and 3616 Fast Vessel Engines Maintenance Records
3406C (PEEC III) Truck Engines Fuel System
EMCPII+ for Gas Engines Connector Contact Identification of Generator Set Control