Water Pump - Remove
Removal Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant from the cooling system into a suitable container for storage or disposal.
- Remove eight bolts (1) and two nuts (2) that fasten the water pump to the front housing.
Show/hide table
 | |
| Illustration 1 | g00556675 |
Typical example | |
- Tap water pump (3) with a soft hammer in order to loosen water pump (3) .
- Remove water pump (3) and the gasket.
Caterpillar Information System:
3054 Engine for Caterpillar Built Machines Engine Oil Pump - Install
3600 Heavy Fuel Engines Metal Particle Detector - Inspect
G3606 and G3608 Engines Water Manifold - Remove and Install
3412E and C30 Marine Engines Electronic Control System
3054 Engine for Caterpillar Built Machines Alternator - Remove and Install
3054 Engine for Caterpillar Built Machines Engine Oil Pump - Remove
3612 and 3616 Fast Vessel Engines Air Shutoff - Test
3054 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump Drive - Remove
3054 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
3412E and C30 Marine Engines Front Power Take-Off (FPTO)
3054 Engine for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
Caterpillar On-Highway Diesel Engine Fluids Recommendations Conventional Coolant/Antifreeze Cooling System Maintenance
G3606 and G3608 Engines Prelubrication Oil Pump - Remove
3054 and 3056 Industrial and Generator Set Engines Water Pump - Disassemble
Electronic Modular Control Panel II+ (EMCP II+) Schematics and Wiring Diagrams
3054 Engine for Caterpillar Built Machines Water Pump - Install
G3606 and G3608 Engines Prelubrication Oil Pump - Install
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump Drive - Install
G3606 and G3608 Engines Prelubrication Oil Pump - Disassemble
3054 Engine for Caterpillar Built Machines Camshaft Bearings - Remove and Install
3412E and C30 Marine Engines Lubrication System
797 Off-Highway Truck Braking System Hydraulic Tank Mounting
3412E and C30 Marine Engines Fuel System