Inlet and Exhaust Valve Seat Inserts - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 9U-6396 | Inlet Valve Seat Extractor | 1 |
9U-6397 | Exhaust Valve Seat Extractor | 1 | |
9S-3095 | Puller Handle | 1 |
Start By:
- Remove the inlet valves and the exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) with appropriate extractor (2) and channel (3) in order to remove valve seat inserts (1).
- Remove valve seat inserts (1) from the cylinder head.
- Repeat the procedure for the remaining valve seat inserts.
Show/hide table
Illustration 1 | g00545912 |
Show/hide table
Illustration 2 | g00632297 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 9U-6183 | Valve Seat Driver | 1 |
9U-6184 | Valve Seat Driver | 1 | |
9U-6185 | Valve Seat Driver | 1 | |
157-3716 | Valve Seat Driver(1) | 1 | |
157-3717 | Valve Seat Driver(1) | 1 |
Show/hide table
(1) | This tool is used for valve guides and valve seats that are not finished. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use the appropriate parts of Tooling (A) in order to install the valve seat insert into the cylinder head assembly.
- Repeat the procedure for the remaining valve seat inserts.
Note: Refer to the Specifications Module for more information on the valve seat inserts.
Show/hide table
Illustration 3 | g00803886 |
End By:
- Install the inlet valves and the exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".
Caterpillar Information System:
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump Drive - Remove
3054 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
3412E and C30 Marine Engines Front Power Take-Off (FPTO)
3054 Engine for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
3612 and 3616 Fast Vessel Engines Engine Mounts - Check
G3606 and G3608 Engines Water Pump Seal - Install
3054 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Inlet Manifold - Install
3606 and 3608 Engines Cooling System Operation
3612 and 3616 Fast Vessel Engines Hourly Performance Log
3054 and 3056 Industrial and Generator Set Engines Inlet Manifold - Remove
3054 Engine for Caterpillar Built Machines Turbocharger - Assemble
3612 and 3616 Fast Vessel Engines Air Shutoff - Test
3054 Engine for Caterpillar Built Machines Engine Oil Pump - Remove
3054 Engine for Caterpillar Built Machines Alternator - Remove and Install
3412E and C30 Marine Engines Electronic Control System
G3606 and G3608 Engines Water Manifold - Remove and Install
3600 Heavy Fuel Engines Metal Particle Detector - Inspect
3054 Engine for Caterpillar Built Machines Engine Oil Pump - Install
3054 Engine for Caterpillar Built Machines Water Pump - Remove
Caterpillar On-Highway Diesel Engine Fluids Recommendations Conventional Coolant/Antifreeze Cooling System Maintenance
G3606 and G3608 Engines Prelubrication Oil Pump - Remove
3054 and 3056 Industrial and Generator Set Engines Water Pump - Disassemble
Electronic Modular Control Panel II+ (EMCP II+) Schematics and Wiring Diagrams