Engine Oil Cooler - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Check the condition of the O-rings. If the O-rings are worn or damaged, use new parts for replacement. Always replace used gaskets with new gaskets.
- Install the O-ring seals on adapter (8). Lightly lubricate the bore of engine oil cooler (7) and the O-ring seals with engine oil. Install the adapter into the engine oil cooler.
- Install the O-ring seals and put the engine oil cooler in position on the engine. Install bolts (9).
Show/hide table
Illustration 2 g00545185 - Install the O-ring seals on adapter (6). Install the O-ring seals on the engine oil cooler bonnet (4). Lightly lubricate the bore of engine oil cooler and the O-ring seals with engine oil.
- Put gasket (5) in position . Put the engine oil cooler bonnet in position on the engine oil cooler.
- Start the threads of bolts (3) loosely.
Show/hide table
Illustration 3 g00545084 - Put gasket (1) in position and install bolts (2).
- Tighten bolts (3) to a torque of
55 ± 7 N·m (40 ± 5 lb ft) . - Fill the engine to the correct level with coolant. See the Operation & Maintenance Manual for instructions on filling the engine with coolant.
Show/hide table
Illustration 1 | g00545186 |
Caterpillar Information System:
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Pump - Remove
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Nozzles - Install
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Nozzles - Remove
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
3054 Engine for Caterpillar Built Machines Fuel Injection Lines - Remove and Install
SR4 HV and SR4B HV Generators Glossary
3412E and C30 Marine Engines Front Power Take-Off (FPTO)
3054 Engine for Caterpillar Built Machines Fuel Transfer Pump - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
3406C (PEEC III) Truck Engines Engine Vibration Troubleshooting
3054 Engine for Caterpillar Built Machines Fuel Transfer Pump - Disassemble
G3606 and G3608 Engines Water Pump - Assemble
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Pump - Install
3054 Engine for Caterpillar Built Machines Turbocharger - Remove
3054 Engine for Caterpillar Built Machines Turbocharger - Install
3054 Engine for Caterpillar Built Machines Turbocharger - Disassemble
G3606 and G3608 Engines Water Pump Seal - Remove
3054 Engine for Caterpillar Built Machines Turbocharger - Assemble
3054 and 3056 Industrial and Generator Set Engines Inlet Manifold - Remove
3612 and 3616 Fast Vessel Engines Hourly Performance Log
3606 and 3608 Engines Cooling System Operation
3054 and 3056 Industrial and Generator Set Engines Inlet Manifold - Install
3054 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
G3606 and G3608 Engines Water Pump Seal - Install