Fan Drive - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-0510     | Driver Group     | 1     |
- Install the fan drive (2) .
Show/hide table
Illustration 1 | g00636125 |
Typical example |
- Use Tool (A) to install fan drive housing (2) .
- Install the four bolts (1). Tighten the bolts to a torque of 44 N·m (32 lb ft).
End By: Install the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Caterpillar Information System:
3606 and 3608 Engines Fuel Shutoff
3054 Engine for Caterpillar Built Machines Fan Drive - Remove
G3606 and G3608 Engines Turbocharger - Remove
3606 and 3608 Engines Pressure Switch
3054 Engine for Caterpillar Built Machines Fan - Remove and Install
G3606 and G3608 Engines Actuator (Heinzman) - Remove and Install
3054 Truck Engine Exhaust Manifold - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Hydraulic Pump Drive
G3408 and G3412 Engines Exhaust Manifold
3412E, C30 and C32 Marine Engines Turbocharger - Install
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System System Self Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System System Schematic
G3606 and G3608 Engines Turbocharger - Install
3054 Engine for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C280 Marine Engines Fuel System Operation
3606 and 3608 Engines Air Inlet and Exhaust System Operation
G3606 and G3608 Engines Turbocharger - Disassemble
3412E and C30 Marine Engines Air Starting System
3412E and C30 Marine Engines Cooling System
G3408 and G3412 Engines Gas Engine Ignition
PM820, PM822, and PM825 Cold Planer Operation
G3606 and G3608 Engines Engine Oil Filler - Remove and Install
3054 Engine for Caterpillar Built Machines Fuel Transfer Pump - Remove
G3606 and G3608 Engines Crankcase Explosion Relief Valve - Remove and Install