Fan Drive - Remove
Removal Procedure
Start By:
- Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
- Remove the four bolts (1) from fan drive housing (2) .
Show/hide table
Illustration 1 | g00636125 |
Typical example |
- Remove the fan drive (2) .
Caterpillar Information System:
G3606 and G3608 Engines Turbocharger - Remove
3606 and 3608 Engines Pressure Switch
3054 Engine for Caterpillar Built Machines Fan - Remove and Install
G3606 and G3608 Engines Actuator (Heinzman) - Remove and Install
3054 Truck Engine Exhaust Manifold - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Hydraulic Pump Drive
G3408 and G3412 Engines Exhaust Manifold
3412E, C30 and C32 Marine Engines Turbocharger - Install
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System System Self Test
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System System Schematic
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Initial Troubleshooting Procedure
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Glossary of Terms
3606 and 3608 Engines Fuel Shutoff
3054 Engine for Caterpillar Built Machines Fan Drive - Install
G3606 and G3608 Engines Turbocharger - Install
3054 Engine for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C280 Marine Engines Fuel System Operation
3606 and 3608 Engines Air Inlet and Exhaust System Operation
G3606 and G3608 Engines Turbocharger - Disassemble
3412E and C30 Marine Engines Air Starting System
3412E and C30 Marine Engines Cooling System
G3408 and G3412 Engines Gas Engine Ignition
PM820, PM822, and PM825 Cold Planer Operation
G3606 and G3608 Engines Engine Oil Filler - Remove and Install