Muffler - Remove and Install
Removal Procedure
Start By:
- Remove the seat. Refer to Disassembly and Assembly, RENR2848, "Seat - Remove and Install".
- Remove the bottom guard. Refer to Disassembly and Assembly, "Bottom Guard - Remove and Install".
Show/hide table
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
- Remove six bolts (1) and washers.
Show/hide table
Illustration 1 | g00542768 |
- Remove access panel (2) .
- Remove four bolts (3) and washers.
Show/hide table
Illustration 2 | g00543774 |
- Remove gasket (4) .
- Loosen two nuts (5) .
Show/hide table
Illustration 3 | g00543783 |
- Remove exhaust pipe (6) through the access panel.
- Remove two bolts (7) and washers.
- Loosen two nuts (8) .
Show/hide table
Illustration 4 | g00543792 |
- Remove muffler (9) .
Installation Procedure
- Install muffler (9) and tighten two nuts (8) .
Show/hide table
Illustration 5 | g00543792 |
- Install two washers and bolts (7). Tighten bolts to a torque of 160 ± 30 N·m (118 ± 22 lb ft).
Show/hide table
Illustration 6 | g00543783 |
- Install exhaust pipe (6) through the access panel.
- Tighten two nuts (5) .
- Install gasket (4) and the exhaust pipe with washers and four bolts (3). Tighten the bolts.
Show/hide table
Illustration 7 | g00543774 |
- Install access panel (2) .
Show/hide table
Illustration 8 | g00542768 |
- Install washers and six bolts (1). Tighten the bolts.
End By:
- Install the bottom guard. Refer to Disassembly and Assembly, "Bottom Guard - Remove and Install".
- Install the seat. Refer to Disassembly and AssemblyRENR2848, "Seat - Remove and Install".
Caterpillar Information System:
302.5 Mini Hydraulic Excavator Engine Supplement Hydraulic Oil Cooler - Install
302.5 Mini Hydraulic Excavator Engine Supplement Hydraulic Oil Cooler - Remove
302.5 Mini Hydraulic Excavator Engine Supplement Water Temperature Regulator - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Water Pump - Remove and Install
307B Excavator Machine Systems Stick Cylinder - Disassemble
302.5 Mini Hydraulic Excavator Engine Supplement Fuel Filter and Water Separator - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Electric Starting Motor - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Bottom Guard - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Alternator - Remove and Install
3054 Engine for Caterpillar Built Machines Crankshaft Rear Seal - Install
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Engine and Machine Warm-Up
3054 Engine for Caterpillar Built Machines Crankshaft Front Seal - Install
307B Excavator Supplement for 4M40 Engine Fuel Priming Pump - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Engine - Remove
302.5 Mini Hydraulic Excavator Engine Supplement Engine - Install
M318 and M320 Excavators Machine Electronic Control System Sensors
3054 Engine for Caterpillar Built Machines Flywheel Housing - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Blade - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Blade Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Accumulator (Hydraulic Pilot) - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Bucket - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Bucket Linkage - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Bucket Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Stick Cylinder - Remove and Install