Hydraulic Oil Cooler - Install
Installation Procedure
- Install hydraulic oil cooler (12).
Show/hide table
Illustration 1 | g00545051 |
- Install washers and two bolts (11). Tighten the bolts.
- Install two hoses and tighten two clamps (10) .
- Position hydraulic oil filter (9) in order to connect tube (8) .
Show/hide table
Illustration 2 | g00545049 |
- Install the hose and tighten clamp (7) .
- Install rear right support assembly (6) with washers and four bolts (5). Tighten the bolts.
Show/hide table
Illustration 3 | g00545017 |
Show/hide table
Illustration 4 | g00545047 |
- Install right side panel (4) with a bracket, washers, and four bolts (3). Tighten the bolts.
Show/hide table
Illustration 5 | g00545009 |
Show/hide table
Illustration 6 | g00545012 |
Show/hide table
Illustration 7 | g00545013 |
- Install right corner protector (2) with washers and four bolts (1) .
Show/hide table
Illustration 8 | g00545008 |
- Close the hood.
End By: Refill oil to the hydraulic tank. Refer to Operation and MaintenanceSEBU7203, "Hydraulic System Oil - Change".
Caterpillar Information System:
302.5 Mini Hydraulic Excavator Engine Supplement Hydraulic Oil Cooler - Remove
302.5 Mini Hydraulic Excavator Engine Supplement Water Temperature Regulator - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Water Pump - Remove and Install
307B Excavator Machine Systems Stick Cylinder - Disassemble
302.5 Mini Hydraulic Excavator Engine Supplement Fuel Filter and Water Separator - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Electric Starting Motor - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Bottom Guard - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Alternator - Remove and Install
3054 Engine for Caterpillar Built Machines Crankshaft Rear Seal - Install
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Engine and Machine Warm-Up
3054 Engine for Caterpillar Built Machines Crankshaft Front Seal - Install
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Engine Starting
302.5 Mini Hydraulic Excavator Engine Supplement Muffler - Remove and Install
307B Excavator Supplement for 4M40 Engine Fuel Priming Pump - Remove and Install
302.5 Mini Hydraulic Excavator Engine Supplement Engine - Remove
302.5 Mini Hydraulic Excavator Engine Supplement Engine - Install
M318 and M320 Excavators Machine Electronic Control System Sensors
3054 Engine for Caterpillar Built Machines Flywheel Housing - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Blade - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Blade Cylinder - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Accumulator (Hydraulic Pilot) - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Bucket - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Bucket Linkage - Remove and Install
302.5 Mini Hydraulic Excavator Machine Systems Bucket Cylinder - Remove and Install