Crankshaft Front Seal - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 9U-6210 | Front Seal Installer | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Clean the housing for the crankshaft front seal and inspect the housing for damage.
- Lubricate the lip of the crankshaft front seal with clean engine oil.
Show/hide table
Illustration 1 g00541748 - Place crankshaft front oil seal (1) into the housing.
Show/hide table
NOTICE Ensure that the lip of the crankshaft front seal that is spring loaded is facing toward the inside of the front housing and that it is square with the bore of the housing for the crankshaft front seal.
Show/hide tableIllustration 2 g00622033 - Use Tooling (A) to install crankshaft front oil seal (1).
- Apply clean engine oil on the area of the crankshaft pulley that will be in contact with crankshaft front seal (1).
End By:
- Install the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install".
Caterpillar Information System:
3126 Truck Engine (Military) Extended Life Coolant (ELC)
3054 Engine for Caterpillar Built Machines Crankshaft Front Seal - Remove
G3408 and G3412 Engines Engine Design
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump
3412E and C30 Engines Voltmeter
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Sensor
G3606 and G3608 Engines Exhaust Manifold - Remove and Install
3054 Truck Engine Crankshaft - Install - 3054 and 3054B Engines
G3408 and G3412 Engines Connecting Rod and Main Bearing Journals
3500 Locomotive Engines Pressure Contactor
G3606 and G3608 Engines Exhaust Bypass - Assemble
3612 and 3616 Engines Pressure Contactor
3126 Truck Engine (Military) Extended Life Coolant (ELC) Cooling System Maintenance
3054 Truck Engine Crankshaft Rear Seal - Remove
3600 Heavy Fuel Engines Engine Protection Devices - Calibrate
3054 Engine for Caterpillar Built Machines Crankshaft Rear Seal - Install
3612 and 3616 Fast Vessel Engines Warranty Information
3054 Engine for Caterpillar Built Machines Flywheel Housing - Remove and Install
G3606 and G3608 Engines Aftercooler - Disassemble
G3606 and G3608 Engines Aftercooler - Assemble
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Glossary of Terms
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Initial Troubleshooting Procedure
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System System Schematic
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System System Self Test