5230 Excavator Hydraulic System Caterpillar


Cooling System

Usage:

5230 7LL



Illustration 1g00578662

Cooling Systems

(1) Hydraulic cooler

(2) Fuel tank

(3) Machine Control Module

(4) Cab Support

(5) Hydraulic cooling fan motors and fans

(6) Vital Information Management System (VIMS)

(7) Hydraulic tank

(8) Temperature sensor for the hydraulic oil

(9) Pressure sensor for the pump drive oil

(10) Radiator cooling fan pump

(11) Pump drive lubrication gear pump

(12) Hydraulic cooling fan pump

(13) Temperature sensor for the pump drive

(14) Interface module 2 for the Vital Information Management System (VIMS)

(15) Cooling pump control solenoid valve for the radiator cooling fan pump

(16) Cooling pump control solenoid valve for the hydraulic cooling piston pump

(17) Pump drive

(18) Temperature sensor for the engine coolant

(19) Engine Control Module

(20) Pump drive lubrication cooler

(21) Radiator

(22) Radiator cooling fan motor and fan

There are three cooling systems on the 5230 Hydraulic Excavator.

  • Radiator cooling system

  • Hydraulic cooling system

  • Cooling system for the pump drive

Caterpillar Information System:

325B Excavator Machine Systems Accumulator (Hydraulic Pilot) - Remove and Install
307B Excavator Machine Systems Counterweight - Remove and Install
3046 Engine For Caterpillar Built Machines Crankshaft - Remove
315B L, 317B L and 317B LN Excavators Attachment Hydraulic System Combined Function Hydraulic Operation - Ball Valves
322B, 322B L, 325B and 325B L Excavators Condenser (Refrigerant) - Clean
S3 Shear and CR3 Crusher Cutter
3306C Engines for Caterpillar Built Machines Accessory Drive Gears (Rear)
S3 Shear and CR3 Crusher Housing
S3 Shear and CR3 Crusher Crushing Arm
307B Excavator Machine Systems Cab Heater - Remove
307B Excavator Machine Systems Gear Pump (Pilot) - Disassemble
BA18 Angle Broom Broom Angle Adjustment
315B L, 317B L and 317B LN Excavators Attachment Hydraulic System Combined Function Hydraulic Operation - Front Lines Group
Caterpillar Monitoring System Service Mode
325B Excavator Machine Systems Solenoid Valve (Proportional Reducing) - Remove and Install
3046 Engine For Caterpillar Built Machines Crankshaft - Install
320B Excavator Hydraulic System General Information
320B Excavator Hydraulic System Pump Hydraulic System
320B Excavator Hydraulic System Piston Pump (Main)
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System Resettable Load Count Mode
320B Excavator Hydraulic System Pump Control (Main Hydraulic)
3304B and 3306B Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
315B L, 317B L and 317B LN Excavators Attachment Hydraulic System Combined Function Hydraulic Operation - Pilot Lines
325B Excavator Machine Systems Relief Valve (Pilot) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.