3176C and 3196 Engines For Caterpillar Built Machines Caterpillar


Cylinder Liner - Remove

Usage:

140H 126

拆卸步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
1U-9593(1)   气缸组拉拔器 
129-6675(2) 气缸组拉拔器 
1U-9897 桥接总成 
1U-6319 套筒 
(1) 1U-9593 气缸组拉拔器用于 C-10 发动机。
(2) 129-6675 气缸组拉拔器 用于 C-12 发动机。

开始:

  1. 拆卸缸盖。 请参阅拆解和组装, "缸盖 - 拆卸"。

  2. 拆下活塞冷却喷嘴。 请参阅拆解和组装, "活塞冷却喷嘴 - 拆卸和安装"。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。



注意

在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。

有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。

按照当地法规和要求处置所有液体。




    图 1g01022478

  1. 从每根连杆上拆下连杆盖螺栓 (2) 。 拆卸连杆盖 (4)。

  2. 用一个软锤将连杆 (3) 轻轻敲离曲轴。 拆卸连杆轴承 (1) 的上半部分。


    注意

    在拆除缸套时,观察推杆,并防止其在向外移动时卡住缸体中的孔径。




    图 2g01022480

  3. 安装工具 (A) 并拆除缸套 (5)、活塞总成和连杆。

  4. 将工具 (A) 从缸盖上拆下。

  5. 将连杆和活塞从缸套上拆除。 从缸套拆下密封件 (6)。

Caterpillar Information System:

3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Service Mode
3606 and 3608 Engines Engine Support
3406C (PEEC III) Truck Engines Fuel System
C-10 and C-12 Industrial Engines Connecting Rod
3612 and 3616 Engines Pressure Regulating Valve
3612 and 3616 Engines Water Temperature Regulator
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Numeric Readout Mode
3176C Engine Refill Capacities
330B Excavator Machine System Specifications Track Roller Mounting
3412E and C30 Marine Engines Diagnostic Flash Code Retrieval
3176C and 3196 Marine Engines Engine Rating Definitions
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Normal Mode
3612 and 3616 Engines Pressure Regulating Valve
3176C Engine Air Compressor
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Tattletale Mode
3054 Truck Engine Engine Design
3412E and C30 Marine Engines Monitoring System
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Units Mode
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Harness Code Mode
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Warning Operation
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System General Information
3054 Truck Engine Fuel Injection Pump
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Electrical Components And Connector Locations
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Service Tools
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.