994D Air System Wheel Loader Caterpillar


Solenoid Valve (Air Horn)

Usage:

994D 3TZ



Illustration 1g00497728

(1) "I" or "IN" indicates the inlet port.

The air horn solenoid valve is normally in the CLOSED position.

Maximum operating air pressure ... 1034 kPa (150 psi)

Inlet orifice ... 2.39 mm (.094 inch)

Coil

Nominal voltage ... 24 VDC
Minimum current at 25° ± 5°C (77° ± 9°F) and at 1034 kPa (150 psi) drop ... 0.324 Ampere
Resistance at 25 ± 5°C (77.0 ± 9.0°F) ... 74.0 ± 7.4 ohms

Caterpillar Information System:

980G Wheel Loader Machine Systems Pilot Valve (Oil Manifold) - Assemble
994D Air System Wheel Loader Solenoid Valve (Automatic Lubrication)
3516B Engine for Caterpillar Built Machines Customer Parameters Worksheet
994D Air System Wheel Loader Solenoid Valve (Air Start)
623F Wheel Tractor-Scraper Machine Systems Brake Actuator - Install
623F Wheel Tractor-Scraper Machine Systems Brake Actuator - Remove
515 Wheel Skidder and 525 Wheel Skidder Transmission and Grapple Electronic Control System Troubleshooting Switch (Tong Auto/Manual)
623F Wheel Tractor-Scraper Machine Systems Brake Actuator - Install
623F Wheel Tractor-Scraper Machine Systems Brake Actuator - Remove
994D Air System Wheel Loader Air Tank
515 Wheel Skidder and 525 Wheel Skidder Ether Starting Aid Cylinder - Replace
3046 Engine For Caterpillar Built Machines Flywheel Housing - Remove and Install
994D Air System Wheel Loader Relief Valve (Air Tank)
623F Wheel Tractor-Scraper Power Train Torque Converter - Assemble
623F Wheel Tractor-Scraper Hydraulic System Floor Cylinder
515 Wheel Skidder and 525 Wheel Skidder Hydraulic System Oil Level - Check
980G Wheel Loader Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
994D Air System Wheel Loader Control Valve (Air Tank Drain)
515 Wheel Skidder and 525 Wheel Skidder Hydraulic System Oil - Change
994D Air System Wheel Loader Air Starting System
963B Track-Type Loader Bucket Teeth and Cutting Edges - Inspect/Replace
515 Wheel Skidder and 525 Wheel Skidder Transmission and Grapple Electronic Control System Glossary of Electrical Terms
515 Wheel Skidder and 525 Wheel Skidder Hydraulic System Oil Filter - Replace
3046 Engine For Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.