Solenoid Valve (Air Start)
Show/hide table
 | |
| Illustration 1 | g00528549 |
The solenoid valve is normally in the CLOSED position.
Maximum operating pressure ... 1207 kPa (175 psi)
Coil
- Nominal voltage ... 24 VDC
- Resistance at 25° ± 5°C (77° ± 9°F) ... 40 ohms
Caterpillar Information System:
623F Wheel Tractor-Scraper Machine Systems Brake Actuator - Install
623F Wheel Tractor-Scraper Machine Systems Brake Actuator - Remove
515 Wheel Skidder and 525 Wheel Skidder Transmission and Grapple Electronic Control System Troubleshooting Switch (Tong Auto/Manual)
623F Wheel Tractor-Scraper Machine Systems Brake Actuator - Install
623F Wheel Tractor-Scraper Machine Systems Brake Actuator - Remove
994D Air System Wheel Loader Air Tank
515 Wheel Skidder and 525 Wheel Skidder Ether Starting Aid Cylinder - Replace
3046 Engine For Caterpillar Built Machines Flywheel Housing - Remove and Install
963B Track-Type Loader Fuses - Replace
973 Track-Type Loader Power Train System Schematics
994D Air System Wheel Loader Pressure Sensor (Air Tank)
623F Wheel Tractor-Scraper Machine Systems Tractor and Scraper - Connect
3516B Engine for Caterpillar Built Machines Customer Parameters Worksheet
994D Air System Wheel Loader Solenoid Valve (Automatic Lubrication)
980G Wheel Loader Machine Systems Pilot Valve (Oil Manifold) - Assemble
994D Air System Wheel Loader Solenoid Valve (Air Horn)
994D Air System Wheel Loader Relief Valve (Air Tank)
623F Wheel Tractor-Scraper Power Train Torque Converter - Assemble
623F Wheel Tractor-Scraper Hydraulic System Floor Cylinder
515 Wheel Skidder and 525 Wheel Skidder Hydraulic System Oil Level - Check
980G Wheel Loader Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
994D Air System Wheel Loader Control Valve (Air Tank Drain)
515 Wheel Skidder and 525 Wheel Skidder Hydraulic System Oil - Change
994D Air System Wheel Loader Air Starting System