Type 1
Illustration 1 | g00449481 |
Type I on 914G 9WM1-1989 and the IT14G 1WN1-1491 |
The creeper speed control allows the operator to infinitely vary the ground speed of the machine. The ground speed can be varied between 0 to 9 km/h (0 to 5.6 mph) in the slow mode.
Move the lever forward into the detent position for the fast mode. This provides the maximum speed setting. Move the lever backward to the point that is just out of the detent. This will put the machine in the maximum slow speed.
When the creeper speed control is moved into the slow speed mode, some of the hystat pump signal is drained to the hydraulic tank. This destrokes the pump and this upstrokes the small variable displacement motor, while machine speed is decreased and full engine rpm is maintained.
Type II
Illustration 2 | g00766168 |
Type II on 914G 9WM1990-UP and the IT14G 1WN1492-UP |
Illustration 3 | g00777237 |
Select the speed range with the switch for the creeper control.
In the slow mode, the creeper speed control allows the operator to infinitely vary the ground speed of the machine. The ground speed can be varied between 0 to 9 km/h (0 to 5.6 mph).
In the fast mode, the creeper speed control allows the operator to infinitely vary the ground speed of the machine. The ground speed can be varied between 0 to 35 km/h (0 to 21.5 mph) for the wheel loader. The ground speed can be varied between 0 to 32 km/h (0 to 19.8 mph) for the integrated toolcarrier.