Crankshaft Rear Seal - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 438-3244     | Oil Seal Installer     | 1     |
B     | 438-3245     | Seal Adapter     | 1     |
C     | 6V-3303     | Bolt     | 1     |
D     | 4B-5275     | Washer     | 1     |
E     | 9U-6172     | Bolt     | 2     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Clean the faces of all the mating parts. Apply a thin coat of clean engine oil to a new crankshaft rear seal.
- Position Tooling (B) onto the crankshaft and install Tooling (E) .
Note: Be sure that Tooling (B) is correctly aligned with the crankshaft.
Show/hide table
Illustration 1 | g00528113 |
- Put new crankshaft rear seal (1) in Tooling (A) .
- Install Tooling (C) , Tooling (D) , and Tooling (A) on Tooling (B) .
- Push crankshaft rear seal (1) onto the crankshaft until Tooling (A) bottoms out.
- Remove the tooling from the crankshaft. Check the crankshaft rear seal for correct installation.
End By: Install the flywheel.
Caterpillar Information System:
307B Excavator Machine Systems Swing Motor - Install
307B Excavator Machine Systems Swing Motor - Remove
3046 Engine For Caterpillar Built Machines Crankshaft Rear Seal - Remove
3064 and 3066 Engines for Caterpillar Built Machines Camshaft
307B Excavator Machine Systems Swivel - Assemble
307B Excavator Machine Systems Swivel - Disassemble
317B Excavator Machine System and Attachment Specifications Stick Lines
3064 and 3066 Engines for Caterpillar Built Machines Gear Group (Front)
3046 Engine For Caterpillar Built Machines Flywheel - Install
320B Excavator Machine System Specifications Stick - 6280 mm (247.2 inch)
M312, M315, M318 and M320 Excavators Hydraulic System Pump Control (Main Hydraulic)
317B Excavator Machine System and Attachment Specifications Boom -
317B Excavator Machine System and Attachment Specifications Stick Lines - Short
3046 Engine For Caterpillar Built Machines Flywheel Housing - Remove and Install
317B Excavator Machine System and Attachment Specifications Lines (Stick) - Clamshell
307B Excavator Machine Systems Swing Motor - Disassemble
5130 Excavator Hydraulic System Cooler (Pump Drive Lubrication)
317B Excavator Machine System and Attachment Specifications Lines (Stick) - Long with Medium Pressure
5130 Excavator Hydraulic System Gear Pump (Pump Drive Lubrication)
307B Excavator Machine Systems Swing Motor - Assemble
3046 Engine For Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
307B Excavator Machine Systems Swing Drive - Remove
307B Excavator Machine Systems Swing Drive - Disassemble
317B Excavator Machine System and Attachment Specifications Lines (Stick) - Short with Quick Coupler