Crankshaft Rear Seal - Remove
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1U-7600 | Slide Hammer Puller Gp | 1 |
Start By:
- Remove the flywheel.
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Drill three evenly spaced 3 mm (.12 inch) holes in crankshaft rear seal (1) .
Show/hide table
 | |
| Illustration 1 | g00527955 |
- Use Tool (A) in order to remove the crankshaft rear seal.
Caterpillar Information System:
3064 and 3066 Engines for Caterpillar Built Machines Camshaft
307B Excavator Machine Systems Swivel - Assemble
307B Excavator Machine Systems Swivel - Disassemble
317B Excavator Machine System and Attachment Specifications Stick Lines
3064 and 3066 Engines for Caterpillar Built Machines Gear Group (Front)
3046 Engine For Caterpillar Built Machines Flywheel - Install
320B Excavator Machine System Specifications Stick - 6280 mm (247.2 inch)
M312, M315, M318 and M320 Excavators Hydraulic System Pump Control (Main Hydraulic)
317B Excavator Machine System and Attachment Specifications Boom -
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System Harness Code Mode
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - 3064
320B Excavator Machine System Specifications Lines (Stick Cylinder)
307B Excavator Machine Systems Swing Motor - Remove
307B Excavator Machine Systems Swing Motor - Install
3046 Engine For Caterpillar Built Machines Crankshaft Rear Seal - Install
317B Excavator Machine System and Attachment Specifications Stick Lines - Short
3046 Engine For Caterpillar Built Machines Flywheel Housing - Remove and Install
317B Excavator Machine System and Attachment Specifications Lines (Stick) - Clamshell
307B Excavator Machine Systems Swing Motor - Disassemble
5130 Excavator Hydraulic System Cooler (Pump Drive Lubrication)
317B Excavator Machine System and Attachment Specifications Lines (Stick) - Long with Medium Pressure
5130 Excavator Hydraulic System Gear Pump (Pump Drive Lubrication)
307B Excavator Machine Systems Swing Motor - Assemble
3046 Engine For Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install