Cooling System Hoses - Inspect
Show/hide table
Pressurized system: Hot coolant can cause serious burn. To open cap, stop engine, wait until radiator is cool. Then loosen cap slowly to relieve the pressure. |
- Inspect all hoses for leaks due to cracking, for softness next to the clamps, and for loose clamps.
- Replace hoses that are cracked or soft and tighten any loose clamps.
Show/hide table
Illustration 1 | g00522316 |
Caterpillar Information System:
315B Excavator Excavator Systems Track Roller - Disassemble
3176C and 3196 Industrial Engines Electronic Control Module - Remove and Install
A13 Auger Chain - Lubricate
315B Excavator Excavator Systems Track Carrier Roller - Assemble
A13 Auger Chain - Inspect/Adjust
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Gear - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Camshaft Gear - Remove and Install
5130 Excavator Hydraulic System Solenoid Valve (Bottom Dump)
5130 Excavator Hydraulic System Solenoid Valve (Swing Parking Brake)
3176C and 3196 Engines For Caterpillar Built Machines Accessory Drive - Assemble
3176C and 3196 Engines For Caterpillar Built Machines Accessory Drive - Disassemble
302.5 Mini Hydraulic Excavator Bucket Linkage - Lubricate
315B Excavator Excavator Systems Track Roller - Assemble
315B Excavator Excavator Systems Track Roller - Install
302.5 Mini Hydraulic Excavator Cooling System Coolant Level - Check
302.5 Mini Hydraulic Excavator Blade Linkage - Lubricate
302.5 Mini Hydraulic Excavator Fuel Tank Water and Sediment - Drain
5130 Excavator Hydraulic System Control Valve (Travel Parking Brake Dual Pressure)
320B Excavator Machine System Specifications Fuel Tank
320B Excavator Machine System Specifications Lines (Front)
315B Excavator Excavator Systems Track - Connect
315B Excavator Excavator Systems Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove and Install
320B Excavator Machine System Specifications Lines (Front)
315B Excavator Excavator Systems Front Idler - Disassemble